Broken hp LaserJet 4250 !
更新時間：2025/3/25 10:07:23,view:702hp打印機BrokenHPLaserJet4250!蘇州hp打印機售后服務中心客服熱線69616769，蘇州hp售后電話，hp售后網點，維修視頻2025/3/25
加松下的粉試試(I have written somewhere on the forum before I think, but I get error messages while trying to post there?
My printer hp LaserJet 4250 is broken.
1. The paper is jamming just behind Tray 1 manual feeding area.
2. The laserink don抰 fits/pastes on the paper. It is just like powder while touching the laserink on the paper.
3. A very loud noise is coming from the backside of the printer.
If i open the hatch on the back the paper wont come out that way anyway.
This is the errorlog:
50 119831 13.05.00 FUSER OUTPUT, PAPER LATE JAM
49 119833 13.05.00 FUSER OUTPUT, PAPER LATE JAM
48 119832 13.05.00 FUSER OUTPUT, PAPER LATE JAM
47 119831 13.05.00 FUSER OUTPUT, PAPER LATE JAM
46 119833 13.05.00 FUSER OUTPUT, PAPER LATE JAM
45 119832 13.05.00 FUSER OUTPUT, PAPER LATE JAM
44 119831 13.05.00 FUSER OUTPUT, PAPER LATE JAM
43 119838 13.02.00 PAPER FEED 1, PAPER STOPPED JAM
42 119837 13.05.00 FUSER OUTPUT, PAPER LATE JAM
41 119837 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
40 119835 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
39 119833 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
38 119831 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
37 119829 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
36 119827 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
How to fix it exactly and what exactly is wrong? Have all errors the same origin?
常見故障問題解答 2010-9-23 21:29:16
Remove the back door. You open it and push on the left bottom part until it pops out. Then there are 2 blue latches on the fuser. Squeeze them and pull it out. Look in the printer on the left side. If you see a pile of gray dust, that's the drive gear teeth.
My printer hp LaserJet 4250 is broken.
1. The paper is jamming just behind Tray 1 manual feeding area.
2. The laserink don抰 fits/pastes on the paper. It is just like powder while touching the laserink on the paper.
3. A very loud noise is coming from the backside of the printer.
If i open the hatch on the back the paper wont come out that way anyway.
This is the errorlog:
50 119831 13.05.00 FUSER OUTPUT, PAPER LATE JAM
49 119833 13.05.00 FUSER OUTPUT, PAPER LATE JAM
48 119832 13.05.00 FUSER OUTPUT, PAPER LATE JAM
47 119831 13.05.00 FUSER OUTPUT, PAPER LATE JAM
46 119833 13.05.00 FUSER OUTPUT, PAPER LATE JAM
45 119832 13.05.00 FUSER OUTPUT, PAPER LATE JAM
44 119831 13.05.00 FUSER OUTPUT, PAPER LATE JAM
43 119838 13.02.00 PAPER FEED 1, PAPER STOPPED JAM
42 119837 13.05.00 FUSER OUTPUT, PAPER LATE JAM
41 119837 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
40 119835 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
39 119833 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
38 119831 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
37 119829 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
36 119827 13.06.00 FUSER OUTPUT, PAPER STOPPED JAM
How to fix it exactly and what exactly is wrong? Have all errors the same origin?
常見故障問題解答 2010-9-23 21:29:16 Remove the back door. You open it and push on the left bottom part until it pops out. Then there are 2 blue latches on the fuser. Squeeze them and pull it out. Look in the printer on the left side. If you see a pile of gray dust, that's the drive gear teeth.
熱門圖文