hp P2015 顯示卡紙，和粉燈亮，是什么問題？
更新時間：2025/6/30 9:49:38,view:664蘇州hp2015打印機售后服務中心客服熱線69616769，蘇州hp打印機售后維修電話，hp打印機售后網點，hp2015pd亮感嘆號燈,打印機P第二個標志顯黃色什么意思,pn打印機閃黃燈,d激光怎樣更換定影膜過程,打印不出感嘆號的燈一直的閃爍,laserjetpd卡紙燈常亮,d最下面三個燈齊亮,D顯示感嘆號,打印白頁,打印機指示燈,d打出來是白紙,下面三燈亮,PD打印機最上面的燈亮,d怎樣換下棍,2015維修視頻2025/5/23
hp P2015 顯示卡紙，和粉燈亮，是什么問題？
hp常見故障問題解答 2011-7-20 21:47:07
To do a Cold Reset:
1. Turn off the printer.
2. Press and hold the Go button.
3. Turn the printer on, and continue to hold the Go button for at least 5 seconds, but not longer
than 15 seconds. During this process, the Attention LED turns on.
4. Release the Go button.
To do an NVRAM Reset:
CAUTION Only perform the following procedure if absolutely necessary. Performing an
NVRAM initialization resets some parameters that cannot be restored later.
NVRAM initialization sets all default variables stored in NVRAM back to factory default values or to a
default ROM value, depending on the variable. It also performs a system reset.
NVRAM initialization resets the following:
仠 All menu settings to factory default values
仠 Factory settings such as formatter number, page counts, and factory paper settings
Use the following procedure to perform an NVRAM initialization.
1. Turn the printer off.
2. Press and hold down the Go button.
3. Turn the printer on, and continue to hold the Go button for at least 20 seconds. During this
process, the Go button, Attention, and Ready LEDs each turn on.
4. Release the Go button.
The printer lights begin cycling. After the NVRAM initialization is complete, the printer returns to the
ready state.
hp常見故障問題解答 2011-7-20 21:47:07 To do a Cold Reset:
1. Turn off the printer.
2. Press and hold the Go button.
3. Turn the printer on, and continue to hold the Go button for at least 5 seconds, but not longer
than 15 seconds. During this process, the Attention LED turns on.
4. Release the Go button.
To do an NVRAM Reset:
CAUTION Only perform the following procedure if absolutely necessary. Performing an
NVRAM initialization resets some parameters that cannot be restored later.
NVRAM initialization sets all default variables stored in NVRAM back to factory default values or to a
default ROM value, depending on the variable. It also performs a system reset.
NVRAM initialization resets the following:
仠 All menu settings to factory default values
仠 Factory settings such as formatter number, page counts, and factory paper settings
Use the following procedure to perform an NVRAM initialization.
1. Turn the printer off.
2. Press and hold down the Go button.
3. Turn the printer on, and continue to hold the Go button for at least 20 seconds. During this
process, the Go button, Attention, and Ready LEDs each turn on.
4. Release the Go button.
The printer lights begin cycling. After the NVRAM initialization is complete, the printer returns to the
ready state.
熱門圖文