施樂305d報061-370代碼
更新時間:2025/7/22 15:13:20,view:1402施樂打印機305d蘇州施樂打印機售后服務中心客服熱線69616769,蘇州施樂售后電話,施樂售后網點,
施樂305 d 報061-370代碼
施樂常見故障問題解答 asd 2015-4-8 17:09:38
解決了嗎?樓主
施樂常見故障問題解答 2015-8-19 9:38:31
施樂305顯示061-370
施樂常見故障問題解答 AS7OQZ8V 2015-8-19 19:20:44
From the service manual:
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the Laser Unit for correct
installation.
Is the Laser Unit correctly installed?
Go to step 3. Reinstall the
Laser Unit. Go
to step 2.
2 Cycle the power.
Does the error still occur?
Go to step 3. Complete.
3 Check the wiring harness connectors
P/J40, P/J41, P/J411, and P/J412
between the MCU Board and the Laser
Unit.
Are the connectors securely
connected?
Go to step 5 Reconnect the
connectors. Go
to step 4.
4 Cycle the power.
Does the error still occur?
Go to step 5. Complete.
5 Replace the Laser Unit (page 8-31).
Does the error still occur?
Replace the
MCU Board
(page 8-59).
Complete.

解決了嗎?樓主

施樂305顯示061-370

From the service manual:
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the Laser Unit for correct
installation.
Is the Laser Unit correctly installed?
Go to step 3. Reinstall the
Laser Unit. Go
to step 2.
2 Cycle the power.
Does the error still occur?
Go to step 3. Complete.
3 Check the wiring harness connectors
P/J40, P/J41, P/J411, and P/J412
between the MCU Board and the Laser
Unit.
Are the connectors securely
connected?
Go to step 5 Reconnect the
connectors. Go
to step 4.
4 Cycle the power.
Does the error still occur?
Go to step 5. Complete.
5 Replace the Laser Unit (page 8-31).
Does the error still occur?
Replace the
MCU Board
(page 8-59).
Complete.

解決了嗎?樓主

From the service manual:
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the Laser Unit for correct
installation.
Is the Laser Unit correctly installed?
Go to step 3. Reinstall the
Laser Unit. Go
to step 2.
2 Cycle the power.
Does the error still occur?
Go to step 3. Complete.
3 Check the wiring harness connectors
P/J40, P/J41, P/J411, and P/J412
between the MCU Board and the Laser
Unit.
Are the connectors securely
connected?
Go to step 5 Reconnect the
connectors. Go
to step 4.
4 Cycle the power.
Does the error still occur?
Go to step 5. Complete.
5 Replace the Laser Unit (page 8-31).
Does the error still occur?
Replace the
MCU Board
(page 8-59).
Complete.

施樂305顯示061-370
熱門圖文