施樂M215b報024-963，檢測不到紙

施樂打印機M215b蘇州施樂打印機售后服務中心客服熱線69616769，蘇州施樂售后電話，施樂售后網點， 富士施樂m215b打印硒鼓機芯片更換, 打印一體機富士施樂M215b更換鼓粉組件, 施樂m215b粉盒即將用盡, 施樂m215b報錯010-397, 施樂M215B重設黑色鼓粉組件,維修視頻2025/3/26

施樂 M215b報024-963，檢測不到紙 技術交流平臺  2016-10-25 21:05:48 

 出現024 371MCU與ESS之間的通信失敗。重新啟動打印機能不能就緒。不能就是就是打印機的控制板有問題了

施樂M215B 曹洫裙 2018/11/20 20:43:57

蘇州市施樂維修站電話-696l6769
 提示無紙 顯示024-963 代碼錯誤,檢查紙路組件.
Code 024-963
Display No Suitable Paper 024-963 Printer Load Paper
Description No Suitable Paper
Causes Registration Sensor. Regi Sensor Harness. MCU Board.
Remedy
1 Check connectors P/J23 and P/J230 between the MCU Board and the Registration Sensor. Are the connections secure Go to Step2. Secure the connectors.
2 Does the error persist Go to Step3. Complete.
3 Disconnect P/J23 and P/J230. Check harness continuity. Is the harness damaged Repair the harness. Go to Step4.
4 Replace the IP Board. Does the error persist Go to Step5. Complete.
5 Disconnect the MCU Board P/J23. Is the voltage across ground and J23-1 3.3 VDC Replace the Registration Sensor. Replace the MCU Board.