理光sp200打印機提示sc542
更新時間：2025/6/8 3:19:08,view:96蘇州理光200打印機售后服務中心客服熱線69616769，蘇州理光打印機售后維修電話，理光打印機售后網點，理光200 s出現C8, sp s錯誤代碼c0, fxl打印機報錯documentjam怎么辦, FXL恢復出廠設置, FXL提示卡紙1, fxl顯示卡紙, fxl啟動白色齒輪卡死, 1l報錯553, MP1L打印機恢復出廠設置, mp1l一直提示卡紙, 1l對位卡紙, MP1l設置IP, mp1l功能性錯誤, MP1L復印時一邊顏色正常一邊偏淺, mp1l打印尺寸不對,200維修視頻2025/5/6
蘇州理光打印機維修電話696l6769，維修，售后服務
Code: SC542
Description:
Fusing Reload Temperature Error (Fatal Error) (C8)
Causes:
After starting up or during operation the machine detected after 5 readings at 1.5 sec. intervals that the hot roller was 5 below the reload (operating) temperature. Unstable input voltage Fusing thermistor deformed or out of position Fusing lamp harness loose, broken, defective Fusing lamp defective Fusing unit defective
Remedy:
Use high quality power source Check the Fusing thermistor position and it harness connection Check the Fusing lamp and it harness connection Replace Fusing unit
理光sp200打印機提示sc542
Code: SC542
Description:
Fusing Reload Temperature Error (Fatal Error) (C8)
Causes:
After starting up or during operation the machine detected after 5 readings at 1.5 sec. intervals that the hot roller was 5 below the reload (operating) temperature. Unstable input voltage Fusing thermistor deformed or out of position Fusing lamp harness loose, broken, defective Fusing lamp defective Fusing unit defective
Remedy:
Use high quality power source Check the Fusing thermistor position and it harness connection Check the Fusing lamp and it harness connection Replace Fusing unit
理光sp200打印機提示sc542
熱門圖文