東芝打印機出現請求維修CA00是什么原因
更新時間：2025/7/16 9:32:43,view:1859蘇州東芝00打印機售后服務中心客服熱線69616769，蘇州東芝打印機售后維修電話，東芝打印機售后網點，東芝00TOSHIBAUniversalPrinter2定期維護時間88,3515ac提示ca,4518a 報錯 08,28s打印機清零,2S一體機出現LSU錯誤,2s硒鼓灌粉后為啥還要換芯片,2S老是顯示錯誤怎么回事,00維修視頻2025/7/15
東芝打印機出現請求維修CA00是什么原因
韓刷盾 2018/6/24 21:02:24 The previous post is correct except when you try to take out the transfer belt cleaner. The blue handle should be left in the horizontal position and the belt cleaning blade should then be removed. Then take out the locking screw and move the handle to the vertical position for transfer belt removal. This also entails removing a screw on the front side pivot point of the duplex unit door. Once the screw is removed the duplex unit door can be moved to the slightly to the right which will allow it to be parked in a completely horizontal position. At this point the belt assy has one connector to unplug. Then the belt can be slid out of the copier. Again make sure the belt cleaning blade is removed FIRST. Also there is usually a screw that has to be removed to remove the belt cleaning blade tube assy.
天樞 2018/6/20 14:16:08 東芝打印機5540C打印機提示CA00 問題出在哪里
技術 zh66yon 發表于 2022/3/24 復印機在預熱后校準圖像，提示報錯代碼：CA00，維查閱維修手冊代碼內容如下↓↓↓
工程師檢查維修機器，發現真正原因是顯影輥表面缺少載體引起報錯。
補充載體就可以了 
技術 安防技能 發表于 2023/1/9 CA00高壓線座換了就好
韓刷盾 2018/6/24 21:02:24 The previous post is correct except when you try to take out the transfer belt cleaner. The blue handle should be left in the horizontal position and the belt cleaning blade should then be removed. Then take out the locking screw and move the handle to the vertical position for transfer belt removal. This also entails removing a screw on the front side pivot point of the duplex unit door. Once the screw is removed the duplex unit door can be moved to the slightly to the right which will allow it to be parked in a completely horizontal position. At this point the belt assy has one connector to unplug. Then the belt can be slid out of the copier. Again make sure the belt cleaning blade is removed FIRST. Also there is usually a screw that has to be removed to remove the belt cleaning blade tube assy. 天樞 2018/6/20 14:16:08 東芝打印機5540C打印機提示CA00 問題出在哪里 工程師檢查維修機器，發現真正原因是顯影輥表面缺少載體引起報錯。
補充載體就可以了
蘇州東芝打印機維修服務電話0512-696l6769
熱門圖文