兄弟1608提示無法打印關閉電源再次打開

更新時間：2025/7/4 22:49:20,view:432

蘇州兄弟1608打印機售后服務中心客服熱線69616769，蘇州兄弟打印機售后維修電話，兄弟打印機售后網點，兄弟1608DCP-打印機更換墨盒,牌打印機怎么清零,牌DCP-打印機裝上新磨粉后總是顯示粉末即將用盡,打印機清零提示系統繁忙,打印機-提示內存,打印機打出來的字太深了,打印機無法打印,關閉電源重新啟動0A,掃描錯誤,打印機前蓋、,dcp-內存已滿,DCP-打印機在哪里方紙,一直提示跟換墨粉,復印機更換墨粉盒,打印機dcp-怎么加墨粉,加粉清零顯示繁忙,1608維修視頻2025/5/30

兄弟1608售后技術論壇 DCP1608 2018/9/23 12:06:42

自我診斷十五分鐘后重啟無法打印05

兄弟1608售后技術論壇蔣泡椽 2018/9/23 19:52:59

定影器故障,或相關驅動電路的問題

兄弟1608售后技術論壇魏媵蘩 2018/9/23 20:07:20

Code05
Display
Print Unable 05 Turn the power off and then back on again.
Description
The center thermistor of the fuser unit has not reached the specified temperature within the specified time.
Remedy
1 Connection failure of the center or side thermistor harness of the fuser unit Reconnect the center or side thermistor harness of the fuser unit.
2 Connection failure of the fuser unit heater harness Reconnect the fuser unit heater harness.
3 Connection failure of the eject sensor PCB flat cable Reconnect the eject sensor PCB flat cable.
4 Connection failure of the LVPS harness Reconnect the LVPS harness.
5 Eject sensor PCB failure Replace the eject sensor PCB ASSY.
6 Fuser unit failure Replace the fuser unit.
7 Low-voltage power supply PCB failure Replace the low-voltage power supply PCB ASSY.
8 Main PCB failure Replace the main PCB ASSY.