佳能打印機出現E000003-0002錯誤是什么原因
更新時間：2025/3/6 9:35:36,view:414佳能蘇州佳能打印機售后服務中心客服熱線69616769，蘇州佳能售后電話，佳能售后網點， 佳能IR2520I復印機復印出來線條模糊, 佳能6580黃燈閃五次, 佳能236掃描儀上出現黃燈閃爍, 佳能傳真機L150錯誤燈一直亮著, 佳能mp258p2error,維修視頻
維修站電話696l6769,維修現場維修
E000003
Timeout at start-up
After the start-up control was started, the start-up control is not completed although 60 sec has passed
1. Check connection of the Connectors (Thermistor Connector and AC Connector).
2. Replace the Film Unit
3. Replace the Shutter Unit.
4. Replace the DC Controller PCB (UN1) NOTE: After performing the above remedy work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.
佳能打印機出現E000003-0002錯誤是什么原因
佳能2206打印淺 手機用戶183.27.*.* 2021-8-10 E000003－0002什么問題
佳能2206usb無法識別 姜甬謠 2021-8-10 E003定影低溫故障
佳能5235打印淺 玉祥 2022-1-15 5235代碼錯誤E000003一0002
佳能5235usb無法識別 尤謠蟋 2022-1-15 此代碼定影器DC板都有可能故障
E000003
Timeout at start-up
After the start-up control was started, the start-up control is not completed although 60 sec has passed
1. Check connection of the Connectors (Thermistor Connector and AC Connector).
2. Replace the Film Unit
3. Replace the Shutter Unit.
4. Replace the DC Controller PCB (UN1) NOTE: After performing the above remedy work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.
佳能打印機出現E000003-0002錯誤是什么原因
佳能2206打印淺 手機用戶183.27.*.* 2021-8-10 E000003－0002什么問題 佳能2206usb無法識別 姜甬謠 2021-8-10 E003定影低溫故障 佳能5235打印淺 玉祥 2022-1-15 5235代碼錯誤E000003一0002 佳能5235usb無法識別 尤謠蟋 2022-1-15 此代碼定影器DC板都有可能故障
熱門圖文