施樂7550彩機出現010-321是怎么回事
更新時間:2025/7/9 23:05:42,view:100蘇州施樂7550打印機售后服務中心客服熱線69616769,蘇州施樂打印機售后維修電話,施樂打印機售后網點, 施樂7550i打印出現重影, 施樂7550出010-322, 施樂7550故障代碼091-311, 施樂7550出現091-312, 施樂c7550報042-326,7550維修視頻2025/4/26
施樂7550彩機出現010-321是怎么回事
施樂7550不通電 手機用戶110.15.*.* 2020-10-30 -321 Fusing Unit Nip Fail 定影錯誤
Bsd-on:CH10.1
Nip or Release operation error of the Fusing Unit was detected.
This Fail is a Sub System failure and its occurrence cuts off the 24VDC_C13. (Refer to BSD CH1.7)
Cause/Action
Check the following:
The Fusing Unit Nip Sensor (DC330 [010-203]) for operation failure. (PL 7.6)
The Sensor Actuator for damage. (PL 7.6)
The Gear of retract mechanism for wear and damage.
The One Way Clutch for skidding.
The Drawer Connector ( DP612/ DJ612) for poor contact.
If no problem is found, replace the MCU PWB. (PL 18.2) 施樂彩色復印機出代碼010-321怎么辦

Bsd-on:CH10.1
Nip or Release operation error of the Fusing Unit was detected.
This Fail is a Sub System failure and its occurrence cuts off the 24VDC_C13. (Refer to BSD CH1.7)
Cause/Action
Check the following:
The Fusing Unit Nip Sensor (DC330 [010-203]) for operation failure. (PL 7.6)
The Sensor Actuator for damage. (PL 7.6)
The Gear of retract mechanism for wear and damage.
The One Way Clutch for skidding.
The Drawer Connector ( DP612/ DJ612) for poor contact.
If no problem is found, replace the MCU PWB. (PL 18.2) 施樂彩色復印機出代碼010-321怎么辦
熱門圖文