Canon9075復印掃描完出代碼E000075-0002
更新時間：2025/7/11 18:12:53,view:122canon打印機,canonCanon9075打印機蘇州canon打印機售后服務中心客服熱線69616769，蘇州canon售后電話，canon售后網點， 佳能9075復印機出E000025-410, 佳能9075維修英文轉中文, 佳能9075代碼E000008-0001, 佳能9075復印機出代碼, 佳能復印機9075的維修手冊,9075維修視頻2025/3/30
e000075-0002轉印異常故障,佳能打復印機轉印報代碼.轉印帶皮帶向前偏移
The E075 error code refers to the ITB belt shifting front to rear of the machine and can not compensate. There are two causes that will make this happen.
a) The machine that is not level
b) Uneven thickness of the ITB belt from front to rear.
To resolve this issue, first observe the ITB Position value of displacement in service mode under Copier > Display > Misc > ITB-POS. The range is between -300 to 450. If the value is very close to the high end or low end, perform the following:
a) Check to make sure that the machine is level.
b) After leveling the machine, run Copier > Function > MISC-P > ITB-INT in service mode
c) Check Copier > Display > MISC > ITB-POS again to make sure the value is approximately within the mid range
d) If the value in step c is not within mid range, remove the ITB belt and reverse it from front to rear and repeat the prior steps again.
Canon9075復印掃描完出代碼E000075-0002
The E075 error code refers to the ITB belt shifting front to rear of the machine and can not compensate. There are two causes that will make this happen.
a) The machine that is not level
b) Uneven thickness of the ITB belt from front to rear.
To resolve this issue, first observe the ITB Position value of displacement in service mode under Copier > Display > Misc > ITB-POS. The range is between -300 to 450. If the value is very close to the high end or low end, perform the following:
a) Check to make sure that the machine is level.
b) After leveling the machine, run Copier > Function > MISC-P > ITB-INT in service mode
c) Check Copier > Display > MISC > ITB-POS again to make sure the value is approximately within the mid range
d) If the value in step c is not within mid range, remove the ITB belt and reverse it from front to rear and repeat the prior steps again.
Canon9075復印掃描完出代碼E000075-0002
熱門圖文