震旦adc218出現c2152要怎么解決
更新時間：2025/7/12 4:32:06,view:214震旦打印機adc218蘇州震旦打印機售后服務中心客服熱線69616769，蘇州震旦售后電話，震旦售后網點， 震旦adc218錯誤代碼p_21, 震旦adc218提示p-9, 震旦ADC218彩色復印機顯C-2152代碼, 震旦adc218顯示p-21p-9是什么原因, 震旦ADC218故障代碼C-2654,維修視頻
震旦adc218出現c2152要怎么解決
震旦adc218 金戟永 2018/11/18 11:03:49 Code C2152
Description Transfer belt pressure welding alienation
• The transfer belt retraction sensor does not detect “switch from retraction to pressure” within a given period time after transfer belt retraction clutch has stared engagement. • The transfer belt retraction sensor does not detect “switch from pressure to retraction” within a given period time after transfer belt retraction clutch has stared engagement.
Remedy
1 Check the connector between M1-PRCB CN14 for proper connection and correct as necessary.
2 Check the connector of M1 for proper drive coupling and correct as necessary.
3 Check the connector between PS39-relay CN124-PRCB CN3 for proper connection and correct as necessary.
4 Check the connector between CL5-relay CN103-PRCB CN24 for proper connection and correct as necessary.
5 PS39 I/O check, sensor check PRCB CN3-15 (ON)
6 CL5 operation check PRCB CN24-4 (ON)
7 M1 operation check PRCB CN14-2 (REM) PRCB CN14-5 (LOCK) C-2 to 5
8 Change M1.
9 PRCB ICP5 conduction check.
10 Change PRCB.
震旦158b 蔣弄妮 2018/12/28 20:56:34 開機的時候出現異響,并且跳錯誤代碼C2152,特別是打印彩色圖片的時候更容易出現這個代碼，把轉印帶拉出來整一整，側蓋的轉印座也清潔一下就可以，用一段時間又出同樣故障，到底是哪里出問題需換什么配件,C2152是轉印帶釋放壓力系統的問題！ 轉印帶壓合分離器故障。 轉印帶縮回操作期間,轉印帶縮回傳感器無法在轉印 帶縮回離合器開啟后的預定時間間隔內檢測到轉印帶 是否位于其縮回位置。
震旦adc218 金戟永 2018/11/18 11:03:49 Code C2152 Description Transfer belt pressure welding alienation
• The transfer belt retraction sensor does not detect “switch from retraction to pressure” within a given period time after transfer belt retraction clutch has stared engagement. • The transfer belt retraction sensor does not detect “switch from pressure to retraction” within a given period time after transfer belt retraction clutch has stared engagement.
Remedy
1 Check the connector between M1-PRCB CN14 for proper connection and correct as necessary.
2 Check the connector of M1 for proper drive coupling and correct as necessary.
3 Check the connector between PS39-relay CN124-PRCB CN3 for proper connection and correct as necessary.
4 Check the connector between CL5-relay CN103-PRCB CN24 for proper connection and correct as necessary.
5 PS39 I/O check, sensor check PRCB CN3-15 (ON)
6 CL5 operation check PRCB CN24-4 (ON)
7 M1 operation check PRCB CN14-2 (REM) PRCB CN14-5 (LOCK) C-2 to 5
8 Change M1.
9 PRCB ICP5 conduction check.
10 Change PRCB.
震旦158b 蔣弄妮 2018/12/28 20:56:34 開機的時候出現異響,并且跳錯誤代碼C2152,特別是打印彩色圖片的時候更容易出現這個代碼，把轉印帶拉出來整一整，側蓋的轉印座也清潔一下就可以，用一段時間又出同樣故障，到底是哪里出問題需換什么配件,C2152是轉印帶釋放壓力系統的問題！ 轉印帶壓合分離器故障。 轉印帶縮回操作期間,轉印帶縮回傳感器無法在轉印 帶縮回離合器開啟后的預定時間間隔內檢測到轉印帶 是否位于其縮回位置。
熱門圖文