兄弟HL-4150CDN無法打印E3
更新時間：2025/7/23 21:14:00,view:60兄弟打印機蘇州兄弟打印機售后服務中心客服熱線69616769，蘇州兄弟售后電話，兄弟售后網點， 兄弟9120C1A錯誤, 打印機兄弟2130三個指示燈閃爍是什么意思?, 兄弟mfc7470d打印重影, 兄弟復印機7360復印全黑, 兄弟dcp-1619提示頂蓋打開,維修視頻
兄弟HL-4150CDN無法打印E3
兄弟4150CDN售后技術論壇 尤育封 2018/6/30 22:32:30 蘇州兄弟 Code: E3
Description:
When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C.
Causes:
Remedy:
1 Heat roller dirty Clean the heat roller. 2 Harness connection failure between paper eject sensor PCB ASSY and fuser unit Check the harness connection between the paper eject sensor PCB ASSY and fuser unit, and reconnect it. 3 Side thermistor or center thermistor failure Replace the fuser unit. 4 Paper eject sensor PCB failure Replace the paper eject sensor PCB ASSY. 5 Main PCB failure Replace the main PCB ASSY.
兄弟4150CDN售后技術論壇 尤育封 2018/6/30 22:32:30 蘇州兄弟 Code: E3Description:
When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C.
Causes:
Remedy:
1 Heat roller dirty Clean the heat roller. 2 Harness connection failure between paper eject sensor PCB ASSY and fuser unit Check the harness connection between the paper eject sensor PCB ASSY and fuser unit, and reconnect it. 3 Side thermistor or center thermistor failure Replace the fuser unit. 4 Paper eject sensor PCB failure Replace the paper eject sensor PCB ASSY. 5 Main PCB failure Replace the main PCB ASSY.
熱門圖文