hp3015報錯59.30，報錯59.30.更換過硒鼓、轉印組件，也冷啟動過，就是解決不了，有人說是齒輪咬合問題，說是錯位，但是看過齒輪組，沒有發現問題所在。就是合上轉印組件轉動齒輪，硒鼓轉動明顯發皺，有異響，打開轉印組件，就沒事了，需要更換齒輪組或是電機嗎?
Code 59.30
Display 59.30 Error
Description Developer motor rotation error. (顯影倉馬達旋轉錯誤)
Remedy
1. Reconnect the connector (J518) on the developing disengagement motor, the connector (J1005) on the driver PCA an d the connector (J91) on the DC controller PCA.
2. Run the sensor test in the sensor monitor mode to verify that the developing disengagement sensor is functioning correctly. If it is not, replace the developing disengagement sensor unit.
3. Run the developing unit engagement an d disengagement drive test in the actuator drive mode to verify that the disengagement mechanism is functioning correctly. If it is not functioning correctly, replace the developing disengagement motor.
蘇州HP3015售后維修電話696l6769，維修，售后服務