佳能復印機代碼e000003-0000怎么清除
更新時間：2025/7/24 7:46:09,view:114佳能打印機蘇州佳能打印機售后服務中心客服熱線69616769，蘇州佳能售后電話，佳能售后網點，
蘇州維修電話696l6769,維修現場維修
E000003
Timeout at start-up
After the start-up control was started, the start-up control is not completed although 60 sec has passed
1. Check connection of the Connectors (Thermistor Connector and AC Connector).
2. Replace the Film Unit
3. Replace the Shutter Unit.
4. Replace the DC Controller PCB (UN1) NOTE: After performing the above remedy work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.
佳能復印機代碼e000003-0000怎么清除
E000003
Timeout at start-up
After the start-up control was started, the start-up control is not completed although 60 sec has passed
1. Check connection of the Connectors (Thermistor Connector and AC Connector).
2. Replace the Film Unit
3. Replace the Shutter Unit.
4. Replace the DC Controller PCB (UN1) NOTE: After performing the above remedy work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.
佳能復印機代碼e000003-0000怎么清除
熱門圖文