柯尼卡美能達500維修代碼c3803
更新時間：2025/7/12 13:59:56,view:38美能達打印機500蘇州美能達打印機售后服務中心客服熱線69616769，蘇州美能達售后電話，美能達售后網點， KONICAMINOLTApagepro1500w墨盒更換, 美能達7516開機提示機器故障C0500, 美能達bizhub500出現2803代碼, 美能達7622維修召喚c0500, 7622美能達c0500,維修視頻
蘇州美能達500售后維修電話696l6769,維修
C3803 ERROR problem with the fusing unit. This is the assembly that gets hot and "fuses" the toner onto your paper. This error code means that the fusing unit did not warm up properly. You will need to have a service company come out to diagnose and repair the problem then reset this code as service mode entry is required in order to reset. It could be as simple as cleaning the thermistor, replacing the thermistor, thermal fuse etc. I would estimate the cost at around $200.00.
Here is the section from the service manual that deals with this code:
Thermistor /1 (TH1) detects a low
temperature when a specified
period of time elapses after the
fusing heater lamp is turned ON
for the fusing ON control.柯尼卡美能達500維修代碼c3803
C3803 ERROR problem with the fusing unit. This is the assembly that gets hot and "fuses" the toner onto your paper. This error code means that the fusing unit did not warm up properly. You will need to have a service company come out to diagnose and repair the problem then reset this code as service mode entry is required in order to reset. It could be as simple as cleaning the thermistor, replacing the thermistor, thermal fuse etc. I would estimate the cost at around $200.00.
Here is the section from the service manual that deals with this code:
Thermistor /1 (TH1) detects a low
temperature when a specified
period of time elapses after the
fusing heater lamp is turned ON
for the fusing ON control.柯尼卡美能達500維修代碼c3803
熱門圖文