富士施樂4127代碼092-311
更新時間：2025/6/27 14:22:12,view:253蘇州施樂4127打印機售后服務中心客服熱線69616769，蘇州施樂打印機售后維修電話，施樂打印機售后網點，施樂4127復印機復印有一豎列印不上字,清潔網怎樣清零,代碼010-330,報092-311,010-326什么問題,出010-330,墨粉無法識別,代碼092-311,出現091-320代碼故障‘,報警010-330,提示091-311,出116-331代碼,報010-326,代碼091-312,報091-312什么問題,4127維修視頻2025/6/27
富士施樂4127代碼092-311，開機跳代碼092-311 提示系統錯誤請重新開機，反復幾次后能正常啟動，然后一整天都能正常工作。第二天一早同樣又會經歷一次092-311 供粉電機故障，檢查下粉量傳感器。
蘇州維修電話696l6769，維修，售后服務092-311 ADC Toner Image Fail
Bsd-on:CH9.8
The condition causing ADC Patch Fail has occurred continuously.
Causes:
The density of the image on the Drum surface is very light. E.g.: Cin 100%<1.0
IOT (charge to development) failure
Low TC
ADC Sensor sensitivity error due to improper installation
ADC Patch was scraped off from Transfer Belt, etc.
技術 iPhone13 發表于 2024/7/15 大概率是副粉倉攪拌阻力過大，打開副粉倉檢查攪拌傳感器，估計哪里已經斷了，還有就是代用粉，原裝粉的話，一般副粉倉不會報這個代碼！
蘇州維修電話696l6769，維修，售后服務092-311 ADC Toner Image Fail
Bsd-on:CH9.8
The condition causing ADC Patch Fail has occurred continuously.
Causes:
The density of the image on the Drum surface is very light. E.g.: Cin 100%<1.0
IOT (charge to development) failure
Low TC
ADC Sensor sensitivity error due to improper installation
ADC Patch was scraped off from Transfer Belt, etc.
熱門圖文