ÃÀÄÜß_6180ˆóåec4001
¸üЕrég£º2025/1/15 20:59:47,view:147ÃÀÄÜß_´òÓ¡™C6180ÌKÖÝÃÀÄÜß_´òÓ¡™CÊÛºó·þ„Õ(w¨´)ÖÐÐĿͷþŸá¾€69616769£¬ÌKÖÝÃÀÄÜß_ÊÛºóëŠÔ’£¬ÃÀÄÜß_ÊÛºó¾W(w¨£ng)üc£¬ ÃÀÄÜß_6180ˆóc2351, ÃÀÄÜß_6180åeÕ`´ú´ac2558, ÃÀÄÜß_6180¾SÐÞÕÙ†¾m2, ÃÀÄÜß_6180ÔO(sh¨¨)ÖûØÖÐÎÄ, minolta6180e c2351¾SÐÞÕÙ†¾,¾SÐÞÒ•îl
ÃÀÄÜß_6180ˆóåec4001
ÃÀÄÜß_6180 511ºÍØS 2018/11/28 12:40:53 ÃÀÄÜß_6180MFˆóåe C4001
ÃÀÄÜß_6180 ÚwòçÊ\ 2018/11/28 19:25:45
Code C4001
Description
Faulty HSYNC
- The SOS sensor does not detect a rising edge of SOS within a given period of time after the polygon motor has started turning and a laser output has been started.
- The SOS sensor detects no rising edges of SOS while VIA (image area control) is ON.
Remedy
1 Turn OFF and ON the power switch.
2 Check the connector between PH unit- PRCB CN1, CN2 for proper connection and correct as necessary.
3 Change PH unit.
4 Change PRCB.


Code C4001
Description
Faulty HSYNC
- The SOS sensor does not detect a rising edge of SOS within a given period of time after the polygon motor has started turning and a laser output has been started.
- The SOS sensor detects no rising edges of SOS while VIA (image area control) is ON.
Remedy
1 Turn OFF and ON the power switch.
2 Check the connector between PH unit- PRCB CN1, CN2 for proper connection and correct as necessary.
3 Change PH unit.
4 Change PRCB.
ŸáéTˆDÎÄ