施樂彩機C5570故障代碼010一330
更新時間：2025/5/24 11:26:38,view:380施樂打印機C5570蘇州施樂打印機售后服務中心客服熱線69616769，蘇州施樂售后電話，施樂售后網點，
施樂彩機C5570故障代碼010一330，F(xiàn)ault Code 010-330(定影馬達異常): The Fuser Motor is Not Rotating at the Specified SpeedMessage Related Fault Code: 010-330 Solutions ranked by relevance:
1,Power the Machine Off an d On
2,Remove an d Re-install the Fuser
3,Replace the Fuser
Most likely you will have to have the fuser replaced. That is an overheat problem. You may just have a piece of paper wrapped in the fuser shutting it down. You can open the left hand drawyer adn remove the fuser , check inside it an d put it back in an d see if that clears.
若以上問題無法解決，歡迎撥打蘇州維修電話696l6769，,上門維修,，維修
1,Power the Machine Off an d On
2,Remove an d Re-install the Fuser
3,Replace the Fuser
Most likely you will have to have the fuser replaced. That is an overheat problem. You may just have a piece of paper wrapped in the fuser shutting it down. You can open the left hand drawyer adn remove the fuser , check inside it an d put it back in an d see if that clears.
若以上問題無法解決，歡迎撥打蘇州維修電話696l6769，,上門維修,，維修
熱門圖文