柯尼卡美能達c360顯示c2555
更新時間：2025/6/10 21:09:16,view:121蘇州美能達360打印機售后服務中心客服熱線69616769，蘇州美能達打印機售后維修電話，美能達打印機售后網(wǎng)點，美能達360出現(xiàn)3721代碼,CI 打印黑色定影不牢,C300ii做初始化后出CD073代碼,代碼4501,出2558代碼,開機報笫二紙盒卡紙,復印機只能識別紙型,故障c3921,錯誤代碼P9P21,4400代碼024-,i復印機錯誤代碼C2152,柯尼卡C怎么進入,不下粉的原因,報代碼3921,柯尼卡報錯誤代碼8102,360維修視頻2025/5/20
柯尼卡美能達c360顯示c2555
技術 sijie2012 發(fā)表于 2022/3/14 美能達360Code C2555
Description Abnormally low toner density detected Yellow TCR Sensor
T/C 0.21 % , less is detected ten consecutive times in the Developing Unit as validated through the toner replenishing amount determination control.
Remedy
1 Perform image troubleshooting procedure if image density is low.
2 Clean the TCR Sensor window on the underside of the Imaging Unit if dirty
3 Correct the TCR Sensor spring moving part if faulty.
4 Clean the TCR Sensor LED if dirty.
5 Change TCR Sensor C/M/Y.
6 M3, M4 operation check PWB-MC PJ8MC-1 to 4 PWB-MC PJ8MC-5 to 8.
7 Change Imaging Unit.
8 Change PWB-MC.
9 Change PWB-MFPC.
手機用戶139.21.*.* 發(fā)表于 2022-6-12 1690
Description Abnormally low toner density detected Yellow TCR Sensor
T/C 0.21 % , less is detected ten consecutive times in the Developing Unit as validated through the toner replenishing amount determination control.
Remedy
1 Perform image troubleshooting procedure if image density is low.
2 Clean the TCR Sensor window on the underside of the Imaging Unit if dirty
3 Correct the TCR Sensor spring moving part if faulty.
4 Clean the TCR Sensor LED if dirty.
5 Change TCR Sensor C/M/Y.
6 M3, M4 operation check PWB-MC PJ8MC-1 to 4 PWB-MC PJ8MC-5 to 8.
7 Change Imaging Unit.
8 Change PWB-MC.
9 Change PWB-MFPC.
熱門圖文