hp LaserJet 1022常見故障代碼描述,英文手冊
更新時間：2025/7/7 14:43:47,view:187蘇州hp1022打印機售后服務中心客服熱線69616769，蘇州hp打印機售后維修電話，hp打印機售后網點，hp1022 n打印機怎么設置ip,打印機不停轉,三燈同時亮,打印機打印第二張時總是卡紙怎么辦？,n驅動官方下載,打印機三個燈閃,打印機紅燈長亮,兩側的燈和中間的燈互閃,打完一頁后再轉半頁,然后就出現卡紙,n一開機就報錯,進紙輪不轉,無硒鼓或前蓋未關,laserjetn打印機開機警示燈閃,n如何打印打印機配置頁,N一開機自檢就卡卡卡,定影不轉,1022維修視頻2025/6/24
Code: 01
Display:
Go: Cycling
Ready: Cycling
Attention: Cycling
Description:
Initialization/startup
During Initialization/startup, the lights cycle one after another in a front-to-back pattern (the "landing lights" pattern). Pressing buttons has no effect when this is the printer status.
Code: 02
Display:
Go: Cycling
Ready:Cycling
Attention: Cycling
Description:
Reconfig initialization
When a power-on function is activated (for example, during a cold reset or NVRAM initialization) the lights cycle as in the startup state. Pressing buttons has no effect when this is the printer status.
Code: 03
Display:
Go: OFF
Ready: ON
Attention: OFF
Description:
Ready (The printer is ready, with no job activity.)
In the Ready state, the READY light is on and the GO and ATTENTION lights are off. In this state, the printer has no errors and is ready to receive data. Pressing the GO button prints a demo page.
Code: 04
Display:
Go: OFF
Ready: Blinking
Attention: OFF
Description:
Processing data (The printer is processing or receiving data.)
During data processing, the READY light is blinking and the GO and ATTENTION lights are off. Pressing the GO button cancels the current job without printing another page. The printer returns to the Ready state after the job has been canceled.
Code: 05
Display:
Go: Cycling
Ready: Cycling
Attention: Cycling
Description:
Job cancellation
During job-cancellation, all of the lights cycle. Pressing the GO button has no effect. After the job-cancel process is complete, the printer returns to the Ready state.
Code: 06
Display:
Go: ON
Ready: OFF
Attention: Blinking
Description:
Continuable error
When a continuable error exists, the GO light is on, the READY light is off, and the ATTENTION light is blinking. Press the GO button to attempt to recover from the error and continue printing. If the printer recovers from the error, it will start to process data and will complete the job. If the recovery fails, the device will return to the continuable-error state. The following actions and events cause continuable errors:
- Manual feeding
- Out of paper for the specified tray
- General continuable error
- Memory overflow (error 20) or memory full (PCL only)
- Temporary engine error (41.x errors)
- I/O error (22 error) / buffer flow error (only with parallel connections)
- I/O data error (40 error) (bad connection) (only with parallel connections)
- Memory configuration error
- Personality/job-related error
- Fuser high temperature (50.011 error)
Code: 07
Display:
Go: OFF
Ready: OFF
Attention: Blinking
Description:
Attention state
In the Attention state, the ATTENTION light is blinking and the GO and READY lights are off. The following conditions create the attention state:
- A tray is empty.
- A door is open.
- The print cartridge is missing.
- A jam exists, or a tray has misfeed.
Press the GO button to attempt to reset the printer after a jam is cleared. Pressing the GO button has no effect in the other error cases. You might need to clear the error manually and then press the GO button or close the top cover. If the error persists, the printer will return to the attention state.
Code: 08
Display:
Go: ON
Ready: ON
Attention: ON
Description:
Fatal error
All three LEDs are on continuously in the fatal-error state. Press the GO button to see the secondary error information for the fatal error. When you release the button the printer returns to the initial Fatal-error state.
1 If the ATTENTION light illuminates as the secondary error pattern, the formatter and engine are not communicating.
- Check the ribbon cable between the formatter and ECU, and check all other connections.
- If the error persists, replace the ECU.
- If the error persists, replace the printer.
2 If the GO and READY lights illuminate as the secondary error pattern, the fuser (fixing assembly) has failed and must be replaced
Code: 09
Display:
Go: Cycling
Ready: Cycling
Attention: Cycling
Description:
Cleaning page
Use the hp Toolbox to initiate the cleaning function. Pressing the GO button has no effect during the cleaning mode.
Code: 10
Display:
Go: OFF
Ready: ON
Attention: OFF
Description:
Sleep mode
From the customer's perspective, sleep mode is the same as Ready mode.
Display:
Go: Cycling
Ready: Cycling
Attention: Cycling
Description:
Initialization/startup
During Initialization/startup, the lights cycle one after another in a front-to-back pattern (the "landing lights" pattern). Pressing buttons has no effect when this is the printer status.
Code: 02
Display:
Go: Cycling
Ready:Cycling
Attention: Cycling
Description:
Reconfig initialization
When a power-on function is activated (for example, during a cold reset or NVRAM initialization) the lights cycle as in the startup state. Pressing buttons has no effect when this is the printer status.
Code: 03
Display:
Go: OFF
Ready: ON
Attention: OFF
Description:
Ready (The printer is ready, with no job activity.)
In the Ready state, the READY light is on and the GO and ATTENTION lights are off. In this state, the printer has no errors and is ready to receive data. Pressing the GO button prints a demo page.
Code: 04
Display:
Go: OFF
Ready: Blinking
Attention: OFF
Description:
Processing data (The printer is processing or receiving data.)
During data processing, the READY light is blinking and the GO and ATTENTION lights are off. Pressing the GO button cancels the current job without printing another page. The printer returns to the Ready state after the job has been canceled.
Code: 05
Display:
Go: Cycling
Ready: Cycling
Attention: Cycling
Description:
Job cancellation
During job-cancellation, all of the lights cycle. Pressing the GO button has no effect. After the job-cancel process is complete, the printer returns to the Ready state.
Code: 06
Display:
Go: ON
Ready: OFF
Attention: Blinking
Description:
Continuable error
When a continuable error exists, the GO light is on, the READY light is off, and the ATTENTION light is blinking. Press the GO button to attempt to recover from the error and continue printing. If the printer recovers from the error, it will start to process data and will complete the job. If the recovery fails, the device will return to the continuable-error state. The following actions and events cause continuable errors:
- Manual feeding
- Out of paper for the specified tray
- General continuable error
- Memory overflow (error 20) or memory full (PCL only)
- Temporary engine error (41.x errors)
- I/O error (22 error) / buffer flow error (only with parallel connections)
- I/O data error (40 error) (bad connection) (only with parallel connections)
- Memory configuration error
- Personality/job-related error
- Fuser high temperature (50.011 error)
Code: 07
Display:
Go: OFF
Ready: OFF
Attention: Blinking
Description:
Attention state
In the Attention state, the ATTENTION light is blinking and the GO and READY lights are off. The following conditions create the attention state:
- A tray is empty.
- A door is open.
- The print cartridge is missing.
- A jam exists, or a tray has misfeed.
Press the GO button to attempt to reset the printer after a jam is cleared. Pressing the GO button has no effect in the other error cases. You might need to clear the error manually and then press the GO button or close the top cover. If the error persists, the printer will return to the attention state.
Code: 08
Display:
Go: ON
Ready: ON
Attention: ON
Description:
Fatal error
All three LEDs are on continuously in the fatal-error state. Press the GO button to see the secondary error information for the fatal error. When you release the button the printer returns to the initial Fatal-error state.
1 If the ATTENTION light illuminates as the secondary error pattern, the formatter and engine are not communicating.
- Check the ribbon cable between the formatter and ECU, and check all other connections.
- If the error persists, replace the ECU.
- If the error persists, replace the printer.
2 If the GO and READY lights illuminate as the secondary error pattern, the fuser (fixing assembly) has failed and must be replaced
Code: 09
Display:
Go: Cycling
Ready: Cycling
Attention: Cycling
Description:
Cleaning page
Use the hp Toolbox to initiate the cleaning function. Pressing the GO button has no effect during the cleaning mode.
Code: 10
Display:
Go: OFF
Ready: ON
Attention: OFF
Description:
Sleep mode
From the customer's perspective, sleep mode is the same as Ready mode.
熱門圖文