hp LaserJet M128 Pro常見故障代碼描述,英文手冊
更新時間：2025/7/14 7:29:53,view:168蘇州hp128打印機售后服務中心客服熱線69616769，蘇州hp打印機售后維修電話，hp打印機售后網點，hp128打印機Mfn黑色碳粉不足,0打印的時候有節奏的響,不能正常打印,0突然打不了A3紙是怎么回事,0亮黃燈和提示燈,0傳真一體機如何傳真設置,0灌墨后不認,fp提示正在使用用過的黑色墨粉盒,mfp原裝鼓換粉后打印效果不佳,MFP新買的硒鼓裝好后提示安裝碳粉盒,MFPMfp換粉后提示墨粉嚴重不足,我的M打印機為什么沒有檢測到新安裝的曬鼓,fp提示碳粉嚴重不足,MFP硒鼓取不出來,fp正在使用已使用過的黑色碳粉盒,128維修視頻2025/5/26
Code: 22
Display:
22 Scanner Error
Description:
The product has experienced an internal hardware error.
Remedy:
1. Check all of the FFC connections. 2. Verify that the scanner-carriage can move along the track in the scanner assembly, and that the scanner motor can rotate. 3. If the error persists, replace the FFC cable. 4. If the error persists, replace the scanner motor or the scanner carriage. 5. If the error persists, replace the formatter.
Code: 50.X
Display:
50.X Fuser Error
Description:
The product has experienced an internal hardware error.
Remedy:
1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the product directly into the wall socket. 3. Turn on the power and wait for the product to initialize. 4. If the error persists, replace the fuser.
Code: 52
Display:
52 Scanner Error
Description:
The product has experienced a scanner error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on. If the error persists, replace the scanner assembly.
Display:
22 Scanner Error
Description:
The product has experienced an internal hardware error.
Remedy:
1. Check all of the FFC connections. 2. Verify that the scanner-carriage can move along the track in the scanner assembly, and that the scanner motor can rotate. 3. If the error persists, replace the FFC cable. 4. If the error persists, replace the scanner motor or the scanner carriage. 5. If the error persists, replace the formatter.
Code: 50.X
Display:
50.X Fuser Error
Description:
The product has experienced an internal hardware error.
Remedy:
1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the product directly into the wall socket. 3. Turn on the power and wait for the product to initialize. 4. If the error persists, replace the fuser.
Code: 52
Display:
52 Scanner Error
Description:
The product has experienced a scanner error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on. If the error persists, replace the scanner assembly.
熱門圖文