hp LaserJet P2015d常見故障代碼描述,英文手冊
更新時間：2025/7/23 10:42:25,view:76蘇州hp2015打印機售后服務中心客服熱線69616769，蘇州hp打印機售后維修電話，hp打印機售后網點，hp2015d硒鼓清除,注意燈就緒,Pd顯示卡紙,pd打印都出兩張紙,pn不進紙?,D卡紙和墨粉燈常亮,pd卡紙燈墨盒燈,面板上第4個燈亮,pd打印機錯誤提示燈亮不能打印,d卡紙燈常亮燈,pd缺墨燈消除,打印機很淡,pd更換進紙輪方法,pd三角感嘆號燈亮,2015維修視頻2025/6/8
Code: 50
Image:
Description:
Fuser error. The fuser has a malfunction
Remedy:
1. Unplug the printer for at least ten minutes, and then plug it in again. 2. Verify that the fuser connector and thermistor connector are both firmly seated in the ECU 3. Perform a heating element resistance check. 4. If the resistance readings are correct, but the error persists, replace the fuser.
Code: 52
Image:
Description:
Laser/scanner error. The laser/scanner has a malfunction.
Remedy:
1. Check the laser/ scanner cable connections. 2. If the error persists, replace the laser/ scanner.
Code: 55
Image:
Description:
Engine error. The formatter and engine are not communicating
Remedy:
1. Unplug the printer, and then plug it in again. 2. Reseat the formatter cable in the ECU. 3. If the error persists, replace the formatter. 4. If, after replacing the formatter, the error persists, replace the ECU.
Code: 57
Image:
Description:
Fan motor error
Remedy:
1. Check the fan cable connections. 2. If the error persists, replace the fan.
Code: 79
Image:
Description:
General fatal error
Remedy:
1. Turn the printer off, and then turn the printer on again. 2. If the error persists, disconnect the I/O cable and print an engine test. If the selftest is successful, reconnect the I/O cable. 3. If the error persists, replace the formatter. 55 50007 Engine error. The formatter and engine are not communicating. 1. Unplug the printer, and
Code: XX
Image:
Description:
Accessory error
Remedy:
If the printer has an accessory error, press and hold the Go button to see the secondary error message. Release the Go button to return to the initial accessory error state.
Image:
Description:
Fuser error. The fuser has a malfunction
Remedy:
1. Unplug the printer for at least ten minutes, and then plug it in again. 2. Verify that the fuser connector and thermistor connector are both firmly seated in the ECU 3. Perform a heating element resistance check. 4. If the resistance readings are correct, but the error persists, replace the fuser.
Code: 52
Image:
Description:
Laser/scanner error. The laser/scanner has a malfunction.
Remedy:
1. Check the laser/ scanner cable connections. 2. If the error persists, replace the laser/ scanner.
Code: 55
Image:
Description:
Engine error. The formatter and engine are not communicating
Remedy:
1. Unplug the printer, and then plug it in again. 2. Reseat the formatter cable in the ECU. 3. If the error persists, replace the formatter. 4. If, after replacing the formatter, the error persists, replace the ECU.
Code: 57
Image:
Description:
Fan motor error
Remedy:
1. Check the fan cable connections. 2. If the error persists, replace the fan.
Code: 79
Image:
Description:
General fatal error
Remedy:
1. Turn the printer off, and then turn the printer on again. 2. If the error persists, disconnect the I/O cable and print an engine test. If the selftest is successful, reconnect the I/O cable. 3. If the error persists, replace the formatter. 55 50007 Engine error. The formatter and engine are not communicating. 1. Unplug the printer, and
Code: XX
Image:
Description:
Accessory error
Remedy:
If the printer has an accessory error, press and hold the Go button to see the secondary error message. Release the Go button to return to the initial accessory error state.
熱門圖文