久久婷婷综合色丁香五月,91久久综合一区二区三区桃色,亚欧一区不卡久久,国内永久免费crm系统网站,91九色麻豆,亚偷熟乱区综合一区二区在线,天天日天天色天天操,91精品国产自产91精品资源,欧日美韩视频网站C0m,久久99国产精品片久久99蜜桃,波多野结衣网站,A级无遮挡超级高清在线观看,免费视频91,国精产品一二三区区别在哪,久久无限看,51爱久久网,欧美日韩B区

蘇州sharp打印機維修服務網 > 維修資料 > sharp > 蘇州sharpSharp AL1530CS售后維修電話696l6769 > 正文

Sharp AL1530CS常見故障代碼描述,英文手冊

更新時間:2025/7/16 20:58:34,view:100

蘇州sharp打印機售后服務中心客服熱線69616769,蘇州sharp打印機售后維修電話,sharp打印機售后網點,sharp維修視頻2025/7/14

Code: E7-01
Description:
Duplex model memory setup error, memory not-detected error
Causes:
The memory is not set properly or the memory capacity is not set to the duplex setup (6M).
Code: E7-02
Description:
LSU trouble
The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON)
Causes:
LSU connector or LSU harness defect or disconnection Polygon motor rotation abnormality Laser beams are not generated. MCU PWB abnormality.
Code: E7-10
Description:
Shading trouble (Black correction)
The CCD black scan level is abnormal when the shading.
Causes:
Improper connection of the CCD unit flat cable CCD unit abnormality MCU PWB abnormality
Code: E7-11
Description:
Shading trouble (White correction)
The CCD white scan level is abnormal when the shading.
Causes:
Improper connection of the CCD unit flat cable Dirt on the mirror, the lens, and the reference white plate Copy lamp lighting abnormality CCD unit abnormality MCU PWB abnormality (When occurred in the SPF scan position.) Improper installation of the mirror unit
Code: E7-16
Description:
Abnormal laser output
When the laser output is stopped, HSYNC is detected.
Causes:
Laser abnormality MCU PWB abnormality.
Code: F5-02
Description:
Copy lamp lighting abnormality
The copy lamp does not turn on.
Causes:
Copy lamp abnormality Copy lamp harness abnormality CCD PWB harness abnormality.
Code: H2-00
Description:
Thermistor open
The thermistor is open. The fusing unit is not installed.
Causes:
Thermistor abnormality Control PWB abnormality Fusing section connector disconnection The fusing unit is not installed.
Code: H3-00
Description:
Heat roller high temperature detection
The fusing temperature exceeds 240°C.
Causes:
Thermistor abnormality Control PWB abnormality Fusing section connector disconnection.

Code: H4-00
Description:
Heat roller low temperature detection
1) When the target temperature (165°C) is not reached in 55 sec after starting warming-up. 2) When the temperature below 100°C is detected for 300ms under the ready print state. "Starting warming-up" means not only that in power supply but also reset that in reset from shut-off and in side door close. (The timing of generating H4 is not limited to that in power supply.)
Causes:
Thermistor abnormality Heater lamp abnormality Thermostat abnormality Control PWB abnormality
Code: L1-00
Description:
Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked)
The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judgment of lock. When the difference in the levels of which and black is small, it is judged that the black mark could not be scanned by lock and the trouble code “L1” is displayed.
Causes:
The scan head is locked by the lock switch. Mirror unit abnormality The scanner wire is disconnected. The origin detection sensor abnormality Mirror motor harness abnormality
Code: L3-00
Description:
Scanner return trouble
When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MhpS) does not turn ON. Or when the mirror base is returned for the specified time (about 6 sec) after start of copy return, the mirror home position sensor (MhpS) does not turn ON.
Causes:
Mirror unit abnormality Scanner wire disconnection Origin detection sensor abnormality Mirror motor harness abnormality
Code: L4-01
Description:
Main motor lock detection
When the main motor encoder pulse is not detected for 100 msec.
Causes:
Main motor unit abnormality Improper connection or disconnection the main motor and the harness. MCU PWB abnormality
Code: L4-32
Description:
Exhaust fan motor lock detection trouble
The error detection is started after 2 sec from starting rotation of the exhaust fan motor. 1) The continuous rotation state of 250ms is not detected for 1 sec after starting detection. 2) When the lock sensor (in the exhaust fan) detects the HIGH level (unstable) after detection the lock state (stable state).
Causes:
Exhaust fan motor connector connection trouble Exhaust fan motor trouble MCU PWB trouble
Code: L6-10
Description:
Polygon motor lock detection
The lock signal (specified rpm signal) does not return within a certain time (about 20 sec) from starting the polygon motor rotation.
Causes:
Polygon motor unit abnormality Improper connection or disconnection of the polygon motor and the harness. MCU PWB abnormality
Code: U2-04
Description:
EEPROM read/write error (Serial communication error)
EEPROM access process error
Causes:
EEPROM abnormality
Code: U2-11
Description:
Counter check sum error (EEPROM)
Check sum error of the counter area in the EEPROM
Causes:
EEPROM abnormality

熱門圖文

相關資料補充_鑻忓窞sharp緇翠慨鐐瑰敭鍚庣數璇漘SharpAL1530CS緇翠慨鎵嬪唽_閿欒浠g爜0512-69616769 更新日期2025/7/14 18:12:39,sharp,,,

»夏普4018報錯H5 58

»夏普2048S上面6個點點 75

»夏普2648網絡打印機設置 248

»夏普2608復印機出現了一個紅的的三角形,一直閃 310

»夏普AR2308D一體機故障代碼 74

»SHARPMX-M2608打印機出現錯誤代碼E7-07 72

»夏普2048三角形黑點閃爍 166

»夏普AR-M258出現U2-40解決方法 123

»夏普2008D面板顯示六個點點紅的機器一直運行、 58

»夏普AR_M455N錯誤代碼L4-30 262

»夏普2658U代碼h501 103

»sharp復印機無法連接設備,請查看設備是否處于掃描模式 181

»SHARP2048S用代用粉,出現嚴重底灰 395

»夏普ARM258提示沒有關閉紙盒1,請推入直至鎖定 200

»夏普打印機出現E7是什么意思 147


sharp鎵撳嵃鏈篠harpAL1530CS鑻忓窞璺ㄥsharp鍞悗鏈嶅姟鐢?shù)璇?512-696l6769錛岃嫃宸瀞harpSharpAL1530CS鍞悗鐢?shù)璇濆Q宻harpSharpAL1530CS璺ㄥ鍞悗緗戠偣,sharpSharpAL1530CS緇翠慨鎵嬪唽錛宻harpSharpAL1530CS椹卞姩紼嬪簭涓嬭澆錛宻harpSharpAL1530CS鎵撳嵃鏈哄敭鍚庣淮淇偣錛宻harpSharpAL1530CS鍘傚鐢?shù)璇濆Q屾晠闅滀唬鐮佸湪綰挎妧鏈氦嫻侊紝鏈夐棶蹇呯瓟,sharpSharpAL1530CS鍗$焊錛屾墦鍗版祬錛屼寒綰㈢伅錛屼笉閫氱數錛屾棤娉曚嬌鐢ㄧ瓑鏁呴殰鑷繁鏌ヨ緇翠慨璧勬枡鍗沖彲瑙e喅闂


熱門關注
· sharp al1540cs常見故障代碼描述,英文手冊

· sharp al1550常見故障代碼描述,英文手冊

· sharp al1551常見故障代碼描述,英文手冊

· sharp al1555常見故障代碼描述,英文手冊

· sharp al1570常見故障代碼描述,英文手冊

· sharp al1556常見故障代碼描述,英文手冊

· sharp al1566常見故障代碼描述,英文手冊

· sharp al1600常見故障代碼描述,英文手冊

· sharp al1610常見故障代碼描述,英文手冊

· sharp al1611常見故障代碼描述,英文手冊

· sharp al1620常見故障代碼描述,英文手冊

· sharp al1621常見故障代碼描述,英文手冊

· sharp al1622常見故障代碼描述,英文手冊

· sharp al1631常見故障代碼描述,英文手冊

· sharp al1633常見故障代碼描述,英文手冊

· sharp al1644常見故障代碼描述,英文手冊

· sharp al1642cs常見故障代碼描述,英文手冊

· sharp al1645cs常見故障代碼描述,英文手冊

· sharp al1650常見故障代碼描述,英文手冊

· sharp al1640常見故障代碼描述,英文手冊

· sharp al1641常見故障代碼描述,英文手冊

· sharp al1651cs常見故障代碼描述,英文手冊

· sharp al1655cs常見故障代碼描述,英文手冊

· sharp al1661cs常見故障代碼描述,英文手冊

· sharp al1670常見故障代碼描述,英文手冊

· sharp al2030常見故障代碼描述,英文手冊

· sharp al2020常見故障代碼描述,英文手冊

· sharp al2021常見故障代碼描述,英文手冊

· sharp al2031常見故障代碼描述,英文手冊

· sharp al2035常見故障代碼描述,英文手冊

推薦文章
· sharp4018打印機小三角燈一直閃問題

· sharpar-4821d打印機出現了那個三角的紅色一直亮著怎么回事

· sharpmx-m2608n無法網絡打印,設置方法

· toshiba2830顯示c970故障代碼

· sharpmx-m850打印機出錯代碼:f2-00怎清除

· sharp2608復印機錯誤代碼l4-11是什么意思怎么解決

· sharp打印機型號是:ar1808s,最近經常出現2f現象,請問是什狀況呀?

· sharp2608復印機怎么清除f2-40代碼

· toshiba打印機3040c請求維修ce40什么意思

· toshiba復印機錯誤代碼2e66什么意思

· sharpdx-2008uc錯誤代碼f2-40是什么意思

· sharpm2608n無法連接設備請查看設備是否處于掃描模式

· 施樂掃描錯誤異常結束(018-543)sharednameerrorinserver

· sharpar2348n顯示錯誤

· sharpar2348n常見問題報錯解決方法帶圖文

· sharpar2048s問題大全

· shngc-1202-00下載

· sharp1808s掃描儀顯示u-2

· sharp2048n呼叫維修

· sharp2348n恢復出廠

· sharp打印機出現錯誤代碼h5-1是設么意思

· sharp打印復印一體機上面顯示有個人的形狀然后紅燈了是什么意思

· 東芝(toshiba)a4多功能一體機e-studio300d加粉流程圖

· sharp2618nc發生錯誤。代碼:l4-43

· sharpar2048打印機顯示需要用戶干預打印不成怎么辦

· toshiba2303卡紙?jiān)跞コ?/p>

· 東芝toshiba2303a打印機提示簡易設置調整錯誤請按確定鍵重試

· sharp-mx2018uc 報l14-04代碼,那位大師指點一下

· toshiba2303a復印機出現e140代碼是什么意思

· sharp ar2008d打印清楚。復印很淡,手動清楚,調整方法

· sharp1808s掃描出現u-2

· toshibastudio2303a換碳粉

· sharp z810常見錯誤代碼及故障詳細描述英文手冊01

· sharp mxm700u常見故障代碼描述,英文手冊1

· sharp mxm700u常見故障代碼描述,英文手冊2

· sharp mxm654fn常見故障代碼描述,英文手冊1

· sharp mxm654fn常見故障代碼描述,英文手冊2

· sharp mxm654fn常見故障代碼描述,英文手冊3

· sharp mxm623u常見故障代碼描述,英文手冊1

· sharp mxm623u常見故障代碼描述,英文手冊2

· sharp mxm620u常見故障代碼描述,英文手冊01

· sharp mxm620u常見故障代碼描述,英文手冊02

· sharp mxm564n常見故障代碼描述,英文手冊01

· sharp mxm564n常見故障代碼描述,英文手冊02

· sharp mxm550u常見故障代碼描述,英文手冊01

· sharp mxm550u常見故障代碼描述,英文手冊02

· sharp mxm503n常見故障代碼描述,英文手冊1

· sharp mxm503n常見故障代碼描述,英文手冊2

· sharp mxm502n常見故障代碼描述,英文手冊2

· sharp mxm502n常見故障代碼描述,英文手冊1