施樂7500出現010-321
更新時間：2025/7/14 19:06:41,view:94施樂打印機7500蘇州施樂打印機售后服務中心客服熱線69616769，蘇州施樂售后電話，施樂售后網點，
施樂7500出現010-321
Bsd-on:CH10.1
Nip , Release operation error of the Fusing Unit was detected.
This Fail is a Sub System failure , its occurrence cuts off the +24VDC_C13. (Refer to BSD CH1.7)
Cause/Action
Check the following:
The Fusing Unit Nip Sensor (DC330 [010-203]) for operation failure. (PL 7.6)
The Sensor Actuator for damage. (PL 7.6)
The Gear of retract mechanism for wear , damage.
The One Way Clutch for skidding.
The Drawer Connector ( DP612/ DJ612) for poor contact.
If no problem is found, replace the MCU PWB. (PL 18.2)
010-321 Fusing Unit Nip Fail
Bsd-on:CH10.1
Nip , Release operation error of the Fusing Unit was detected.
This Fail is a Sub System failure , its occurrence cuts off the +24VDC_C13. (Refer to BSD CH1.7)
Cause/Action
Check the following:
The Fusing Unit Nip Sensor (DC330 [010-203]) for operation failure. (PL 7.6)
The Sensor Actuator for damage. (PL 7.6)
The Gear of retract mechanism for wear , damage.
The One Way Clutch for skidding.
The Drawer Connector ( DP612/ DJ612) for poor contact.
If no problem is found, replace the MCU PWB. (PL 18.2)
若以上問題無法解決，歡迎撥打蘇州施樂維修點電話696l6769，企業一站式服務，上門維修，耗材配送
熱門圖文