美能達283復印機出現才C-3821故障
更新時間：2025/7/18 2:21:52,view:217蘇州美能達283打印機售后服務中心客服熱線69616769，蘇州美能達打印機售后維修電話，美能達打印機售后網點，美能達283復印時提示4501,c5102代碼,報c3723怎么解決,卡紙傳感器怎么裝,掃描才幾張就顯示內存滿了,C4501代碼,出現代碼2558,出現C3723是怎么回事,現故障代碼C-4501,提示硒鼓壽命到,紙盒1燈亮,顯示4501???,每次都要等數據接收完了才開始打印,出現代碼C-3723怎么清除,283維修視頻2025/6/15
美能達283復印機出現才C-3821故障
技術 hldbtdpd 2022/2/5 美能達283 Code C3821 (定影低溫錯誤)
Description
Fusing abnormally low temperature detection (heating side)
The heating roller thermistor continues to detect a temperature lower than a predetermined one for a predetermined period of time.
In the states other than a warm-up operation, a zero cross signal cannot be detected after the lapse of a predetermined period of time after the fusing heater is turned ON, OFF.
The power supply frequency cannot be detected.
Remedy
1 Check the fusing unit for correct installation (whether it is secured in position).
2 Check the open/close operation of the upper right door.
3 Check the fusing unit, PRCB,DCPU for proper connection,correct, change as necessary.
4 Change fusing unit.
5 Change PRCB.
6 Change DCPU.
Description
Fusing abnormally low temperature detection (heating side)
The heating roller thermistor continues to detect a temperature lower than a predetermined one for a predetermined period of time.
In the states other than a warm-up operation, a zero cross signal cannot be detected after the lapse of a predetermined period of time after the fusing heater is turned ON, OFF.
The power supply frequency cannot be detected.
Remedy
1 Check the fusing unit for correct installation (whether it is secured in position).
2 Check the open/close operation of the upper right door.
3 Check the fusing unit, PRCB,DCPU for proper connection,correct, change as necessary.
4 Change fusing unit.
5 Change PRCB.
6 Change DCPU.
熱門圖文