柯美751復印機故障代碼3803
更新時間：2025/7/19 21:19:57,view:174蘇州柯美751打印機售后服務中心客服熱線69616769，蘇州柯美打印機售后維修電話，柯美打印機售后網點，柯美751出現C3,提示最大濃度傳感器在打印時檢測到紙張,c200故障代碼C6怎么清除,7723提示c3,C-2202,換上載體后有異響,出現c-2703,復印機7723維修代碼C3,維修模式打印控制開關,雙面復印背面有底灰,柯尼卡維修模式里,報錯c6,c3故障代碼,751維修視頻2025/6/24
蘇州柯美751售后維修電話696l6769,維修
C3803 ERROR problem with the fusing unit. This is the assembly that gets hot and "fuses" the toner onto your paper. This error code means that the fusing unit did not warm up properly. You will need to have a service company come out to diagnose and repair the problem then reset this code as service mode entry is required in order to reset. It could be as simple as cleaning the thermistor, replacing the thermistor, thermal fuse etc. I would estimate the cost at around $200.00.
Here is the section from the service manual that deals with this code:
Thermistor /1 (TH1) detects a low
temperature when a specified
period of time elapses after the
fusing heater lamp is turned ON
for the fusing ON control.柯美751復印機故障代碼3803
C3803 ERROR problem with the fusing unit. This is the assembly that gets hot and "fuses" the toner onto your paper. This error code means that the fusing unit did not warm up properly. You will need to have a service company come out to diagnose and repair the problem then reset this code as service mode entry is required in order to reset. It could be as simple as cleaning the thermistor, replacing the thermistor, thermal fuse etc. I would estimate the cost at around $200.00.
Here is the section from the service manual that deals with this code:
Thermistor /1 (TH1) detects a low
temperature when a specified
period of time elapses after the
fusing heater lamp is turned ON
for the fusing ON control.柯美751復印機故障代碼3803
熱門圖文