三星M2676N一體機錯誤代碼:#U1-2330
更新時間：2025/7/20 18:54:38,view:129蘇州三星2676打印機售后服務中心客服熱線69616769，蘇州三星打印機售后維修電話，三星打印機售后網點，三星2676fh打印機復印出現ECO模式,mn加粉后清零,一休機提示,mn成像裝置用盡,mn顯示更換新粉盒,N更換成像裝置,打印有重影,mn硒鼓壽命已到,準備新的粉盒,mfh打印變黑,mn直接加墨粉后顯示墨粉不足,打印機mn卡紙,2676維修視頻2025/7/20
三星M2676N一體機錯誤代碼:#U1-2330
三星M2676售后技術論壇 蔣莆欏 2018/7/19 21:43:51 蘇州維修電話696l6769 Code:U1-2320, U1-2330, U1-2340
Display
Error # Turn off then on
Description
The temperature control of fuser unit is abnormal. (U1-2320 : Open Heat Error / U1-2330 : Low Heat Error / U1-2340 : Over Heat Error)
Remedy
1) Turn the machine off. Re-install the fuser unit. Then turn the machine on. Is the error message is disappeared?
2) If the problem persists, turn the machine off and remove the fuser unit.
a) Check if the fuser connector is connected properly.
b) Check if the input voltage is normal.
c) Check if the thermistor is twisted or contaminated.
3) After confirming continuity in the fuser connector and the problem still exists; order an SMPS/HVPS and Fuser Unit and install as is necessary.
三星M2676售后技術論壇 蔣莆欏 2018/7/19 21:43:51 蘇州維修電話696l6769 Code:U1-2320, U1-2330, U1-2340Display
Error # Turn off then on
Description
The temperature control of fuser unit is abnormal. (U1-2320 : Open Heat Error / U1-2330 : Low Heat Error / U1-2340 : Over Heat Error)
Remedy
1) Turn the machine off. Re-install the fuser unit. Then turn the machine on. Is the error message is disappeared?
2) If the problem persists, turn the machine off and remove the fuser unit.
a) Check if the fuser connector is connected properly.
b) Check if the input voltage is normal.
c) Check if the thermistor is twisted or contaminated.
3) After confirming continuity in the fuser connector and the problem still exists; order an SMPS/HVPS and Fuser Unit and install as is necessary.
熱門圖文