柯美C284彩機報C4801
更新時間：2025/7/19 17:09:38,view:251蘇州柯美284打印機售后服務中心客服熱線69616769，蘇州柯美打印機售后維修電話，柯美打印機售后網點，柯美284出現C2551,CE密碼重置,AKONICAMINOLTAPCL打印文件被掛起,C-D411,出現2558代碼,復印機提示c-5102,如何消除故障代碼,代碼0,c色彩對位測試樣式,達bizhubc提示更換圖像轉印單元,屏幕不顯示,代碼1,284維修視頻2025/5/28
求助柯美C284彩機報C4801柯美C284彩機由于原主板壞了無法備份引擎數據更換主板上機報C4801，大神們有什么辦法解決？ 蘇州
Code C4801Description
Main unit board failureMFP detects simultaneous replacement of multiple boards.Remedy
1 Reinstall the old PRCB. 2 Back up data.1. Call the Service Mode to the screen. 2. Call the Enhanced Security to the screen. 3. Touch [Engine Data Backup].
2. Touch [Engine Data Save mode], and press the Start key. 3. Select [Yes], and press the Start key again. 4. Check that the result “OK” appears.
3 Replace PRCB Turn OFF the main power switch and replace the current PRCB with a new one. (When using a PRCB of another machine in service, be sure to use a PRCB installed in the same model.)
4 Restore back up data. 1. Turn ON the main power switch. 2. Check that the trouble code “C4802” appears and then display service mode. 3. Call the Enhanced Security to the screen. 4. Touch [Engine Data Backup]. 5. Touch [Engine Data Load mode], and press the Start key. 6. Select [Yes], and press the Start key again. 7. Check that the result “OK” appears. 8. Turn OFF the main power switch and turn it ON again more than 10 seconds after.
5 Update the PRCB firmware.
6 If the above actions do not solve the problem, contact KMBT.
Code C4801Description
Main unit board failureMFP detects simultaneous replacement of multiple boards.Remedy
1 Reinstall the old PRCB. 2 Back up data.1. Call the Service Mode to the screen. 2. Call the Enhanced Security to the screen. 3. Touch [Engine Data Backup].
2. Touch [Engine Data Save mode], and press the Start key. 3. Select [Yes], and press the Start key again. 4. Check that the result “OK” appears.
3 Replace PRCB Turn OFF the main power switch and replace the current PRCB with a new one. (When using a PRCB of another machine in service, be sure to use a PRCB installed in the same model.)
4 Restore back up data. 1. Turn ON the main power switch. 2. Check that the trouble code “C4802” appears and then display service mode. 3. Call the Enhanced Security to the screen. 4. Touch [Engine Data Backup]. 5. Touch [Engine Data Load mode], and press the Start key. 6. Select [Yes], and press the Start key again. 7. Check that the result “OK” appears. 8. Turn OFF the main power switch and turn it ON again more than 10 seconds after.
5 Update the PRCB firmware.
6 If the above actions do not solve the problem, contact KMBT.
熱門圖文