美能達6000/7000報錯代碼C-3501，C3501解決方法
更新時間：2025/1/7 21:39:20,view:172美能達打印機蘇州美能達打印機售后服務中心客服熱線69616769，蘇州美能達售后電話，美能達售后網點， 美能達195維修改召喚c2558, 美能達bizhub7718打印機維修召喚m2, 柯尼卡美能達235官方網維修資料, 美能達c210復印機成像單元, 美能達c210復印機3821代碼,維修視頻
美能達6000/7000報錯代碼C-3501，C3501解決方法
Cause
Fuser high temp error.
Resolution
The Service mode is accessible by entering Utility = Stop = 0 = Stop = 0 =; 0 = 1. This is to prevent accidental reset of the code and causing additional damage to the machine.
To reset a fuser abnormality code, perform the following:
Then you will need to follow below to reset the dip switch on the machine.
Power the machine OFF from the main switch leaving the sub switch ON.
Turn main power switch ON while pressing the Utility/Counter key. Keep holding it till the comes up in Service mode.
Press [03 System Setting] on the touchscreen.
Press [01 Software SW setting] on the touchscreen.
Press the left up-arrow, which is displayed on the touchscreen, 2 times. The number displayed above the up-arrow will change to 03.
Select the bit number of switch 1, using the right up-arrow, 03-1 will be indicated.
Press the [Return] key, which is displayed on the touchscreen.
Exit Service mode to return to normal operation
C-3501, C-3502, C-3503, C-3504, C-3505, C-3506, C-3507, C-3508C-3801, C-3802, C-3803, C-3804, C-3805, C-3806C-3901, C-3902, C-3903, C-3904, C-3905, C-3906, C-3907, C-3908, C-3909, C-3910,C-3911, C-3912, C-3913, C-3914, C-3915, C-3916蘇州美能達打印機維修站電話696l6769，企業一站式服務，上門維修，耗材配送
Cause
Fuser high temp error.
Resolution
The Service mode is accessible by entering Utility = Stop = 0 = Stop = 0 =; 0 = 1. This is to prevent accidental reset of the code and causing additional damage to the machine.
To reset a fuser abnormality code, perform the following:
Then you will need to follow below to reset the dip switch on the machine.
Power the machine OFF from the main switch leaving the sub switch ON.
Turn main power switch ON while pressing the Utility/Counter key. Keep holding it till the comes up in Service mode.
Press [03 System Setting] on the touchscreen.
Press [01 Software SW setting] on the touchscreen.
Press the left up-arrow, which is displayed on the touchscreen, 2 times. The number displayed above the up-arrow will change to 03.
Select the bit number of switch 1, using the right up-arrow, 03-1 will be indicated.
Press the [Return] key, which is displayed on the touchscreen.
Exit Service mode to return to normal operation
C-3501, C-3502, C-3503, C-3504, C-3505, C-3506, C-3507, C-3508C-3801, C-3802, C-3803, C-3804, C-3805, C-3806C-3901, C-3902, C-3903, C-3904, C-3905, C-3906, C-3907, C-3908, C-3909, C-3910,C-3911, C-3912, C-3913, C-3914, C-3915, C-3916蘇州美能達打印機維修站電話696l6769，企業一站式服務，上門維修，耗材配送
熱門圖文