美能達6000/7000報錯代碼C-3913,C3913解決方法
更新時間:2025/5/16 10:39:36,view:141蘇州美能達打印機售后服務中心客服熱線69616769,蘇州美能達打印機售后維修電話,美能達打印機售后網點,美能達維修視頻2025/5/16
美能達6000/7000報錯代碼C-3913,C3913解決方法
Cause
Fuser not set correctly
Resolution
Make sure that the fuser is set correctly and that the screw on the fuser is tightened into the frame of the machine.
Then you will need to follow below to reset the dip switch on the machine.
Power the machine OFF from the main switch leaving the sub switch ON.
Turn main power switch ON while pressing the Utility/Counter key. Keep holding it till the comes up in Service mode.
Press [03 System Setting] on the touchscreen.
Press [01 Software SW setting] on the touchscreen.
Press the left up-arrow, which is displayed on the touchscreen, 2 times. The number displayed above the up-arrow will change to 03.
Select the bit number of switch 1, using the right up-arrow, 03-1 will be indicated.
Press the [Return] key, which is displayed on the touchscreen.
Exit Service mode to return to normal operation
蘇州美能達打印機維修站電話696l6769,企業一站式服務,上門維修,耗材配送
Cause
Fuser not set correctly
Resolution
Make sure that the fuser is set correctly and that the screw on the fuser is tightened into the frame of the machine.
Then you will need to follow below to reset the dip switch on the machine.
Power the machine OFF from the main switch leaving the sub switch ON.
Turn main power switch ON while pressing the Utility/Counter key. Keep holding it till the comes up in Service mode.
Press [03 System Setting] on the touchscreen.
Press [01 Software SW setting] on the touchscreen.
Press the left up-arrow, which is displayed on the touchscreen, 2 times. The number displayed above the up-arrow will change to 03.
Select the bit number of switch 1, using the right up-arrow, 03-1 will be indicated.
Press the [Return] key, which is displayed on the touchscreen.
Exit Service mode to return to normal operation
蘇州美能達打印機維修站電話696l6769,企業一站式服務,上門維修,耗材配送
熱門圖文