美能達6000/7000報錯代碼C-4661，C4661解決方法
更新時間：2025/1/7 21:39:20,view:415美能達打印機蘇州美能達打印機售后服務中心客服熱線69616769，蘇州美能達售后電話，美能達售后網點，
美能達6000/7000報錯代碼C-4661，C4661解決方法
Cause
Colour regustration sensor (C-4661 - Yellow, C-4662 Magenta, C-4663 - Cyan, C-4664 Black)
Resolution
Step 1.
Clean the eyes
Step 1.
1 open the front door 〔l〕 of the main body.
Loosen the screws（2]（2 pieces.
2Open the toner hopper unit door1]
3Pull up the right lever f1l and left lever 2]
frontward，and then pul out the process unit 13].
Important Hold the center of the lever when operatngt|t。
this is the section to clean
sce close up to the right the 3 sensors are behind shutters that need to be lifted up to clean the sensor Color registration sensor shutter/FrColor registration sensor shutter/Rr PGC sensor shutter
Step 2.
Power the machine OFF from the main switch leaving the sub switch ON.
Turn main power switch ON while pressing the Utility/Counter key. Keep holding it till the comes up in Service mode.
-02 process adjustment
-02 drum peculiarity
-06 toner revert all on
-02 gamma automatic adjust (wait for adjustment to complete)
Step 3.
-01 Machine Adjustment
-01 Printer Adjustment
-10 Colour Registration Adjustment (wait for adjustment to complete)
When completed exit out of service mode. 蘇州美能達打印機維修站電話696l6769，企業一站式服務，上門維修，耗材配送
Cause
Colour regustration sensor (C-4661 - Yellow, C-4662 Magenta, C-4663 - Cyan, C-4664 Black)
Resolution
Step 1.
Clean the eyes
Step 1.
1 open the front door 〔l〕 of the main body.
Loosen the screws（2]（2 pieces.
2Open the toner hopper unit door1]
3Pull up the right lever f1l and left lever 2]
frontward，and then pul out the process unit 13].
Important Hold the center of the lever when operatngt|t。
this is the section to clean
sce close up to the right the 3 sensors are behind shutters that need to be lifted up to clean the sensor Color registration sensor shutter/FrColor registration sensor shutter/Rr PGC sensor shutter
Step 2.
Power the machine OFF from the main switch leaving the sub switch ON.
Turn main power switch ON while pressing the Utility/Counter key. Keep holding it till the comes up in Service mode.
-02 process adjustment
-02 drum peculiarity
-06 toner revert all on
-02 gamma automatic adjust (wait for adjustment to complete)
Step 3.
-01 Machine Adjustment
-01 Printer Adjustment
-10 Colour Registration Adjustment (wait for adjustment to complete)
When completed exit out of service mode. 蘇州美能達打印機維修站電話696l6769，企業一站式服務，上門維修，耗材配送
熱門圖文