東芝2303AM換過載體初始化完后，重新開機后報C414
更新時間：2025/7/23 17:44:34,view:498蘇州東芝2303打印機售后服務中心客服熱線69616769，蘇州東芝打印機售后維修電話，東芝打印機售后網點，東芝2303打印機am怎么設置？,a粉盒錯誤,出現請求維修C449,studioa簡易設置調試錯誤,am打印機簡易設置調整錯誤,故障代碼c412,am維修網,復印如何加深,復印機A請求維修CA10, c970,am顯示調整錯誤,a出現墨粉錯誤,TOSHIBAA打印機新的打印機需要調試嗎?,TOSHIBAA打印機C452,am復印機使用說明書,2303維修視頻2025/7/23
東芝2303AM換過載體初始化完后，重新開機后報C414，不能工作
維修手冊,故障代碼,技術通報 
技術 仁和數碼 發表于 2022/8/13 C414], perform the following:
1. Turn ON the power while [0] , [8] are pressed simultaneously.
2. Key in "2002", then press [START].
3. Change the current status counter value "1" , "2" to "0", then press [OK] (to cancel [C413 / C414]).
4. Turn the power OFF , then back ON. Make sure that the equipment enters the normal ready state.
維修手冊,故障代碼,技術通報
·C414定影器故障，跟換載體沒關系
·Code C414
Description Fuser unit related service call. Thermistor abnormality during warming up or in ready status after abnormality judgment.
Causes MAIN board Thermistors Heater lamp
蘇州東芝2303AM售后維修電話696l6769，企業一站式服務，上門維修，耗材配送
1. Turn ON the power while [0] , [8] are pressed simultaneously.
2. Key in "2002", then press [START].
3. Change the current status counter value "1" , "2" to "0", then press [OK] (to cancel [C413 / C414]).
4. Turn the power OFF , then back ON. Make sure that the equipment enters the normal ready state.
熱門圖文