東芝打印機出現c911請求維修
更新時間：2025/7/23 10:14:25,view:92蘇州涓滆姖打印機售后服務中心客服熱線69616769，蘇州涓滆姖打印機售后維修電話，涓滆姖打印機售后網點，涓滆姖維修視頻2025/7/9
東芝打印機出現c911請求維修
東芝911進紙卡紙 ghostwindows30 2022/1/16 蘇州東芝911售后維修服務中心地址查詢 Code C911
Description
Toner cartridge IC chip access board abnormality (caused by factors other than C910)
Causes
Toner cartridge LGC board HRNS-LGC-TNRIC-140 CTIF board HRNS-TNRIC-140
Remedy
1 Does non-genuine toner cartridge display appear when the front cover is opened and closed? Yes Use the genuine toner cartridge.
2 No 2 2 Toner cartridge ?Check the phenomenon by removing the toner cartridges (Y, M, C and K) and reinserting them. ?Check that the CTRG board of each cartridge (Y, M, C and K) is installed properly.
3 Contact point on the equipment side Check that the spring of the contact point for each color (Y, M, C and K) is not deformed.
4 Is the spring of the contact point returned when it is pushed lightly? Yes No ?Check that the CTIF board is installed properly. ?Board check 7
Notes: The spring of the contact point may be released if you push the toner cartridge all the way in when an abnormality occurs. 5 LGC board ?Connector check (CN364) ?Board check 6 HRNS-LGC-TNRIC-140 ?Relay connector check (J556, J557, J558, J559) ?Harness check 7 CTIF board for each color (Y, M, C and K) ?Check that the board is installed properly. ?Board check 8 HRNS-TNRIC-140 for each color (Y, M, C and K) ?Connector check ?Harness check
東芝911進紙卡紙 ghostwindows30 2022/1/16 蘇州東芝911售后維修服務中心地址查詢 Code C911Description
Toner cartridge IC chip access board abnormality (caused by factors other than C910)
Causes
Toner cartridge LGC board HRNS-LGC-TNRIC-140 CTIF board HRNS-TNRIC-140
Remedy
1 Does non-genuine toner cartridge display appear when the front cover is opened and closed? Yes Use the genuine toner cartridge.
2 No 2 2 Toner cartridge ?Check the phenomenon by removing the toner cartridges (Y, M, C and K) and reinserting them. ?Check that the CTRG board of each cartridge (Y, M, C and K) is installed properly.
3 Contact point on the equipment side Check that the spring of the contact point for each color (Y, M, C and K) is not deformed.
4 Is the spring of the contact point returned when it is pushed lightly? Yes No ?Check that the CTIF board is installed properly. ?Board check 7
Notes: The spring of the contact point may be released if you push the toner cartridge all the way in when an abnormality occurs. 5 LGC board ?Connector check (CN364) ?Board check 6 HRNS-LGC-TNRIC-140 ?Relay connector check (J556, J557, J558, J559) ?Harness check 7 CTIF board for each color (Y, M, C and K) ?Check that the board is installed properly. ?Board check 8 HRNS-TNRIC-140 for each color (Y, M, C and K) ?Connector check ?Harness check
熱門圖文