美能達維修召喚c3852
更新時間：2025/7/12 13:35:37,view:210蘇州美能達3852打印機售后服務中心客服熱線69616769，蘇州美能達打印機售后維修電話，美能達打印機售后網點，美能達3852 C, 出代碼c-, 復印機出現C, 故障代碼如何清除, 維修召喚, 柯尼卡C300出現C如何清除, 維修C, 報錯, 達復印機顯示機器故障C是什么意思, 故障代碼, 350錯誤C, BH250出現C, 350出現, 195C怎么解決,3852維修視頻2025/5/4
美能達維修召喚c3852
美能達c350售后技術論壇 不離不棄 2018/10/9 13:25:35 350C5832是什么意思，怎么解決。。。。。
美能達c350售后技術論壇 韓室絞 2018/10/10 22:02:13 Code C3852
Description Low Fuser Temperature Failure (Sub)
- The Fusing Roller Thermistor and Fusing Roller Sub Thermistor are detected to be at a temperature below
105 °C during standby.
- The Fusing Roller Thermistor and Fusing Roller Sub Thermistor are detected to be at a temperature below
105 °C during printing.
Remedy
1 Check that the H1 comes on when the Right-Side Door is opened, then closed, and correct or replace as necessary.
2 Check that the H2 comes on when the Right-Side Door is opened, then closed, and correct or replace as necessary.
3 Check the installation of the TH1 and the TH2, and correct or clean as necessary.
4 Check the operation of the TH1. Remove CN80 (4P), and then check that the resistance across CN80-2 and -3 on the Thermistor is infinity.
5 Check the operation of the TH2. Remove CN81 (4P), and then check that the resistance across CN81-2 and -3 on the Thermistor is infinity.
6 Check the continuity of the H1. Correct or replace as necessary.
7 Check the continuity of the H2. Correct or replace as necessary.
8 Change PU1.
9 Change PWB-A.
美能達c350售后技術論壇 不離不棄 2018/10/9 13:25:35 350C5832是什么意思，怎么解決。。。。。 美能達c350售后技術論壇 韓室絞 2018/10/10 22:02:13 Code C3852 Description Low Fuser Temperature Failure (Sub)
- The Fusing Roller Thermistor and Fusing Roller Sub Thermistor are detected to be at a temperature below
105 °C during standby.
- The Fusing Roller Thermistor and Fusing Roller Sub Thermistor are detected to be at a temperature below
105 °C during printing.
Remedy
1 Check that the H1 comes on when the Right-Side Door is opened, then closed, and correct or replace as necessary.
2 Check that the H2 comes on when the Right-Side Door is opened, then closed, and correct or replace as necessary.
3 Check the installation of the TH1 and the TH2, and correct or clean as necessary.
4 Check the operation of the TH1. Remove CN80 (4P), and then check that the resistance across CN80-2 and -3 on the Thermistor is infinity.
5 Check the operation of the TH2. Remove CN81 (4P), and then check that the resistance across CN81-2 and -3 on the Thermistor is infinity.
6 Check the continuity of the H1. Correct or replace as necessary.
7 Check the continuity of the H2. Correct or replace as necessary.
8 Change PU1.
9 Change PWB-A.
熱門圖文