東芝復印機出現C471怎么處理
更新時間：2025/7/16 23:28:29,view:305蘇州東芝471打印機售后服務中心客服熱線69616769，蘇州東芝打印機售后維修電話，東芝打印機售后網點，東芝471655請求維修c,655復印機報,5508報,7508代碼c,655復印機出現代碼,471維修視頻2025/6/8
東芝復印機出現C471怎么處理
東芝655售后技術論壇 鄧中武 2018/7/27 8:55:31 東芝655復合機出現請求維護c471怎么處理 東芝655售后技術論壇 &＃20911;&＃33575;&＃27572; 2018/7/27 19:45:07 Code:C471
Description
IH board initialization abnormality
Causes
Side cover interlock switch. LGC board FIL board IH board Power supply
Remedy
Power supply ?Check if the power voltage is normal.(Is the voltage during the operation ?0% of the rated voltage?) Side cover interlock switch ?Connector check (J1008, CN354) ?Harness check Fuser unit ?Drawer connector check ?Thermostat check ?Unit check LGC board ?Connector check (CN357) ?Board check FIL board ?Connector check ?Board check IH board ?Connector check (CN561, CN562, CN563) ?Board check Status counter 1. [0], [8] Power ON. 2. Key in ?002? then press [START]. 3. Change the current status counter value (08-2002) "11" to "0" 4. Turn the power OFF and then back ON. Make sure that the equipment enters the normal ready state. Connector and harness ?Check the connectors and harnesses of the parts replaced just before C471 occurred. ?Check the connectors which connect the equipment and LCF/PFP.
東芝655售后技術論壇 鄧中武 2018/7/27 8:55:31 東芝655復合機出現請求維護c471怎么處理 東芝655售后技術論壇 &＃20911;&＃33575;&＃27572; 2018/7/27 19:45:07 Code:C471Description
IH board initialization abnormality
Causes
Side cover interlock switch. LGC board FIL board IH board Power supply
Remedy
Power supply ?Check if the power voltage is normal.(Is the voltage during the operation ?0% of the rated voltage?) Side cover interlock switch ?Connector check (J1008, CN354) ?Harness check Fuser unit ?Drawer connector check ?Thermostat check ?Unit check LGC board ?Connector check (CN357) ?Board check FIL board ?Connector check ?Board check IH board ?Connector check (CN561, CN562, CN563) ?Board check Status counter 1. [0], [8] Power ON. 2. Key in ?002? then press [START]. 3. Change the current status counter value (08-2002) "11" to "0" 4. Turn the power OFF and then back ON. Make sure that the equipment enters the normal ready state. Connector and harness ?Check the connectors and harnesses of the parts replaced just before C471 occurred. ?Check the connectors which connect the equipment and LCF/PFP.
熱門圖文