hp Color LaserJet CP4005常見故障代碼描述,英文手冊1
更新時間：2025/6/22 10:25:26,view:103蘇州hp4005打印機售后服務中心客服熱線69616769，蘇州hp打印機售后維修電話，hp打印機售后網點，hp4005CP如果用代用硒鼓會不會出問題？,0.2定影器錯誤,報59.3錯誤,pro9AO,打印機59.30代碼,激光打印機，彩色打印不出來,pro0.2錯誤什么問題,0.2定影器錯誤關閉,彩色打印機文字不重影而圖片重影,C報要求更換傳送套件,打印黑色正常彩色很淡,02定影器錯誤怎么回事,4005維修視頻2025/6/22
Code: -
Display:
Control Panel display is blank
Description:
Possibly poor formatter, or Compact Flash Firmware card connection, or Control Panel display problem.
Remedy:
1. Reseat formatter 2. Reseat compact flash 3. Reseat memory DIMM(s) 4. Replace compact flash and firmware card 5. Replace memory DIMM 6. Replace formatter 7. Check flat ribbon cable connector from DC controller to formatter 8. Check formatter power connectors for LVPS 9. Check Control Panel display connectors to DC controller 10. Replace Control Panel display
Code: 10.00.00
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: black print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.00.01
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: cyan print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.00.02
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: magenta print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.00.03
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: yellow print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.90.X
Display:
10.90.X REPLACE [COLOR] CARTRIDGE
Description:
A color cartridge is out of toner and needs to be replaced
Remedy:
Replace the affected color cartridge.
Code: 10.92.00
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
black print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 10.92.01
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
cyan print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 10.92.02
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
magenta print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 10.92.03
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
yellow print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 11.X
Display:
11.X INTERNAL CLOCK ERROR
Description:
This message is displayed when there is a problem with the real-time clock on the formatter board. XX=01 Dead clock battery XX=02 Dead real-time clock
Remedy:
Replace the formatter assembly.
Code: 13.XX.YY
Display:
13.XX.YY EXTERNAL OUTPUT DEVICE PAPER JAM (4700 models)
Description:
There is a jam in the stapler/stacker.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press and to step through the instructions. 3. For more information about clearing jams,
Code: 13.XX.YY
Display:
13.XX.YY JAM IN DUPLEX PATH
Description:
There is a jam in the duplex path.
Remedy:
1. Remove the paper. 2. Run the paper path test to determine if one or more of the sensors are not working correctly. 3. Check the oblique rollers on the back side of the ETB to ensure they are not worn or dirty. 4. Upgrade formatter and DC Controller firmware. 5. Replace the ETB. 6. Check all cable connections to/from DC controller.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN OUTPUT DEVICE
Description:
Paper is jammed in an external paper handling device. The amber light on the stacker/stapler is blinking. 13.12.01 = early reached 13.12.02 = entrance sensor not reached 13.12.03 = entrance sensor not escaped 13.12.04 = entrance sensor remaining 13.12.05 = exit sensor not reached 13.12.06 = exit sensor not escaped 13.12.07 = exit sensor remaining 13.12.08 = top cover open 13.12.09 = stapler cover open
Remedy:
Check the duplexer or the stapler/stacker for jammed paper
Code: 13.XX.YY
Display:
13.XX.YY JAM IN PAPER PATH
Description:
There is a jam in the paper path. 13.12.00 = jam in paper path 13.20.00 = jam in paper path 13.21.00 = jam in paper path
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions. 3. For more information, see Jams on page 402. 4. If paper is folding into an accordion shape, check whether the shutter on each print cartridge opens as you close the ETB and each cartridge is turning correctly. Replace defective print cartridges or drive motors. 5. Clean the attaching roller at the bottom of the ETB and make sure that the spring is holding it in place. 6. Upgrade formatter and DC Controller firmware. 7. Replace the paper pickup PCB. 8. Check all cable connections to/from the DC Controller. 9. Replace the ETB if it is not moving paper correctly. Calibrate the printer.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN STAPLER
Description:
A staple is jammed in the stapler. Check the stapler/stacker for jammed staples.
Remedy:
Remove the defective staple in the cartridge.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN TRAY 1
Description:
Paper is jammed in Tray 1.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press down to see step by step information. 4. Clean the pickup roller. If it is worn or damaged, replace it. 5. Clean or replace the separation pad. 6. Upgrade formatter and DC Controller firmware
Code: 13.XX.YY
Display:
13.XX.YY JAM IN TRAY X
Description:
A page is jammed in Tray 2 or in one or more of the optional trays.
Remedy:
1. Press for detailed information about clearing the jam. 2. Press and to step through the instructions. 3. Clean the pickup roller. If it is worn or damaged, replace it. 4. Clean the feed roller. If it is worn or damaged, replace it. 5. Upgrade formatter and DC Controller firmware, which can be found in a single. 6. Check all cable connection to/from DC controller. 7. Replace the tray X paper pickup drive assembly. 8. Replace the tray X lifter motor. 9. Replace the paper feed assembly.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN TOP COVER OR DUPLEX AREA
Description:
There is a jam in the top cover area.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions. 3. Replace the fuser. 4. Check that the fuser paper sensor is in place. If it is defective, replace it.
Code: 13.XX.YY
Display:
13.XX.YY JAM INSIDE DUPLEXER
Description:
Paper is jammed in the duplexer. Check the device for jammed paper.
Remedy:
1. Remove the jammed paper. 2. Make sure the paper meets the media specifications for the duplexer. 3. Make sure the duplexer is seated correctly. 4. Make sure the sensor (SR8001) in the duplexer is operating correctly by performing a paper path test. 5. Replace the duplexer if it is not working correctly. 6. Upgrade formatter and DC Controller firmware. 7. Check all cable connection to/from DC controller.
Code: 13.XX.YY
Display:
13.XX.YY JAM INSIDE FRONT COVER
Description:
There is a jam in the front cover.
Remedy:
1. Remove the jammed paper. 2. Press ? for detailed information about clearing the jam. 3. Press up and down to step through the instructions.
Code: 13.XX.YY
Display:
13.XX.YY JAM INSIDE TOP COVER
Description:
There is a jam in the top cover area.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions. 3. Upgrade formatter and DC Controller firmware. 4. Upgrade formatter and DC Controller firmware. 5. Replace the fuser. 6. Check all cable connection to/from DC controller. 7. Check that the fuser paper sensor is in place. If it is defective, replace it. 8. Check all cable connection to/from DC controller.
Code: 13.XX.YY
Display:
13.XX.YY MULTIPLE JAMS IN DUPLEX PATH
Description:
There are multiple jams in the duplex path. This includes the top cover area.
Remedy:
See 13.XX.YY JAM INSIDE DUPLEXER and 13.XX.YY JAM IN DUPLEX PATH for recommended actions.
Code: 13.XX.YY
Display:
13.XX.YY MULTIPLE JAMS IN PAPER PATH
Description:
There are multiple jams in the paper path. This includes the top cover area.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions.
Code: 20
Display:
20 Insufficient Memory
Description:
The printer has received more data from the computer than fits in available memory.
Remedy:
1. Press to continue printing. NOTE A loss of data will occur. 2. Reduce the complexity of the print job to avoid this error in the future. 3. Adding memory to the printer may allow printing of more complex pages.
Code: 22
Display:
22 EIO X BUFFER OVERFLOW
Description:
The EIO card in card slot X has overflowed its I/O buffer during a busy state.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resend the print job. 4. If the error still occurs, replace the EIO card in slot X.
Code: 22
Display:
22 EMBEDDED I/O BUFFER OVERFLOW
Description:
The embedded Jetdirect print server has overflowed.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resend the print job. 4. If the error still occurs, replace the EIO card in slot X.
Code: 22
Display:
22 PARALLEL I/O BUFFER OVERFLOW
Description:
The parallel buffer has overflowed during a busy state
Remedy:
1. Press to resume printing. NOTE A loss of data will occur. 2. If the message persists, disconnect the parallel cable at both ends and reconnect. 3. Ensure that a high quality cable is being used. Some non-hp parallel cables might be missing pin connections or might not otherwise conform to IEEE-1284 specifications. 4. Replace the cable. 5. Leave the computer connected and try to connect to a different printer. If this still fails, replace the formatter.
Code: 22
Display:
22 USB I/O BUFFER OVERFLOW
Description:
The USB buffer has overflowed during a busy state.
Remedy:
1. Press to continue printing. NOTE A loss of data will occur. 2. If the message persists, disconnect the USB cable at both ends and reconnect. 3. Ensure that a high quality cable is being used. Some non-hp parallel cables might be missing pin connections. 4. Replace the cable. 5. Leave the computer connected and try to connect to a different printer. If this still fails, replace the formatter.
Code: 40
Display:
40 EIO X BAD TRANSMISSION
Description:
A connection with the card in EIO slot X has been broken.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resend the print job. 4. If the error still occurs, replace the EIO card in slot X.
Code: 40
Display:
40 EMBEDDED I/O BAD TRANSMISSION
Description:
A connection with the embedded Jetdirect print server has been broken.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resent the print job. 4. If the error still occurs, replace the EIO card in slot X or the formatter.
Code: 41.3
Display:
41.3 UNEXPECTED SIZE IN TRAY X
Description:
Media is loaded that is longer or shorter in the feed direction than the size configured for the tray.
Remedy:
1. Make sure the correct settings are set for the trays. 2. Run a paper path diagnostic test to determine if all sensors are working correctly. 3. Replace the paper feed assembly.
Code: 41.5
Display:
41.5 UNEXPECTED TYPE IN TRAY X
Description:
The printer senses a different media type in the media path than configured in the tray.
Remedy:
1. Make sure the correct settings are set for the trays. 2. Run a paper path diagnostic test to determine if all sensors are working correctly. 3. Replace the paper feed assembly.
Display:
Control Panel display is blank
Description:
Possibly poor formatter, or Compact Flash Firmware card connection, or Control Panel display problem.
Remedy:
1. Reseat formatter 2. Reseat compact flash 3. Reseat memory DIMM(s) 4. Replace compact flash and firmware card 5. Replace memory DIMM 6. Replace formatter 7. Check flat ribbon cable connector from DC controller to formatter 8. Check formatter power connectors for LVPS 9. Check Control Panel display connectors to DC controller 10. Replace Control Panel display
Code: 10.00.00
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: black print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.00.01
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: cyan print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.00.02
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: magenta print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.00.03
Display:
10.XX.YY SUPPLY MEMORY ERROR
Description:
The printer cannot read or write to at least one print cartridge memory tag or at least one memory tag is missing. The following control panel messages correspond to the color of the print cartridge: yellow print cartridge
Remedy:
1. Turn the printer off then on. 2. Exchange the cartridge for the indicated color with a cartridge in another slot to determine whether the error follows the cartridge or stays with the slot. If the error follows the cartridge, replace that cartridge. Otherwise, continue with step 3. 3. Make sure that the E label memory contacts are not dirty or damaged. 4. Make sure the cartridge guide for the affected print cartridge is installed correctly. 5. Upgrade formatter and DC Controller firmware. 6. Reseat the connectors between the memory PCB (J9630) and the E label memory contacts, the memory PCB (J4001), and the DC controller PCB (J1021). 7. Check all cable connections to/from DC controller. 8. Replace the E label memory contacts. 9. Replace the memory PCB.
Code: 10.90.X
Display:
10.90.X REPLACE [COLOR] CARTRIDGE
Description:
A color cartridge is out of toner and needs to be replaced
Remedy:
Replace the affected color cartridge.
Code: 10.92.00
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
black print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 10.92.01
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
cyan print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 10.92.02
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
magenta print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 10.92.03
Display:
10.XX.YY CARTRIDGES
Description:
The print cartridge is not seated properly in the printer
yellow print cartridge
Remedy:
1. Make sure that the ETB is closed. 2. Remove and reinstall the affected print cartridge. 3. Make sure the cartridge guide for the affected print cartridge is installed correctly
Code: 11.X
Display:
11.X INTERNAL CLOCK ERROR
Description:
This message is displayed when there is a problem with the real-time clock on the formatter board. XX=01 Dead clock battery XX=02 Dead real-time clock
Remedy:
Replace the formatter assembly.
Code: 13.XX.YY
Display:
13.XX.YY EXTERNAL OUTPUT DEVICE PAPER JAM (4700 models)
Description:
There is a jam in the stapler/stacker.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press and to step through the instructions. 3. For more information about clearing jams,
Code: 13.XX.YY
Display:
13.XX.YY JAM IN DUPLEX PATH
Description:
There is a jam in the duplex path.
Remedy:
1. Remove the paper. 2. Run the paper path test to determine if one or more of the sensors are not working correctly. 3. Check the oblique rollers on the back side of the ETB to ensure they are not worn or dirty. 4. Upgrade formatter and DC Controller firmware. 5. Replace the ETB. 6. Check all cable connections to/from DC controller.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN OUTPUT DEVICE
Description:
Paper is jammed in an external paper handling device. The amber light on the stacker/stapler is blinking. 13.12.01 = early reached 13.12.02 = entrance sensor not reached 13.12.03 = entrance sensor not escaped 13.12.04 = entrance sensor remaining 13.12.05 = exit sensor not reached 13.12.06 = exit sensor not escaped 13.12.07 = exit sensor remaining 13.12.08 = top cover open 13.12.09 = stapler cover open
Remedy:
Check the duplexer or the stapler/stacker for jammed paper
Code: 13.XX.YY
Display:
13.XX.YY JAM IN PAPER PATH
Description:
There is a jam in the paper path. 13.12.00 = jam in paper path 13.20.00 = jam in paper path 13.21.00 = jam in paper path
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions. 3. For more information, see Jams on page 402. 4. If paper is folding into an accordion shape, check whether the shutter on each print cartridge opens as you close the ETB and each cartridge is turning correctly. Replace defective print cartridges or drive motors. 5. Clean the attaching roller at the bottom of the ETB and make sure that the spring is holding it in place. 6. Upgrade formatter and DC Controller firmware. 7. Replace the paper pickup PCB. 8. Check all cable connections to/from the DC Controller. 9. Replace the ETB if it is not moving paper correctly. Calibrate the printer.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN STAPLER
Description:
A staple is jammed in the stapler. Check the stapler/stacker for jammed staples.
Remedy:
Remove the defective staple in the cartridge.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN TRAY 1
Description:
Paper is jammed in Tray 1.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press down to see step by step information. 4. Clean the pickup roller. If it is worn or damaged, replace it. 5. Clean or replace the separation pad. 6. Upgrade formatter and DC Controller firmware
Code: 13.XX.YY
Display:
13.XX.YY JAM IN TRAY X
Description:
A page is jammed in Tray 2 or in one or more of the optional trays.
Remedy:
1. Press for detailed information about clearing the jam. 2. Press and to step through the instructions. 3. Clean the pickup roller. If it is worn or damaged, replace it. 4. Clean the feed roller. If it is worn or damaged, replace it. 5. Upgrade formatter and DC Controller firmware, which can be found in a single. 6. Check all cable connection to/from DC controller. 7. Replace the tray X paper pickup drive assembly. 8. Replace the tray X lifter motor. 9. Replace the paper feed assembly.
Code: 13.XX.YY
Display:
13.XX.YY JAM IN TOP COVER OR DUPLEX AREA
Description:
There is a jam in the top cover area.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions. 3. Replace the fuser. 4. Check that the fuser paper sensor is in place. If it is defective, replace it.
Code: 13.XX.YY
Display:
13.XX.YY JAM INSIDE DUPLEXER
Description:
Paper is jammed in the duplexer. Check the device for jammed paper.
Remedy:
1. Remove the jammed paper. 2. Make sure the paper meets the media specifications for the duplexer. 3. Make sure the duplexer is seated correctly. 4. Make sure the sensor (SR8001) in the duplexer is operating correctly by performing a paper path test. 5. Replace the duplexer if it is not working correctly. 6. Upgrade formatter and DC Controller firmware. 7. Check all cable connection to/from DC controller.
Code: 13.XX.YY
Display:
13.XX.YY JAM INSIDE FRONT COVER
Description:
There is a jam in the front cover.
Remedy:
1. Remove the jammed paper. 2. Press ? for detailed information about clearing the jam. 3. Press up and down to step through the instructions.
Code: 13.XX.YY
Display:
13.XX.YY JAM INSIDE TOP COVER
Description:
There is a jam in the top cover area.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions. 3. Upgrade formatter and DC Controller firmware. 4. Upgrade formatter and DC Controller firmware. 5. Replace the fuser. 6. Check all cable connection to/from DC controller. 7. Check that the fuser paper sensor is in place. If it is defective, replace it. 8. Check all cable connection to/from DC controller.
Code: 13.XX.YY
Display:
13.XX.YY MULTIPLE JAMS IN DUPLEX PATH
Description:
There are multiple jams in the duplex path. This includes the top cover area.
Remedy:
See 13.XX.YY JAM INSIDE DUPLEXER and 13.XX.YY JAM IN DUPLEX PATH for recommended actions.
Code: 13.XX.YY
Display:
13.XX.YY MULTIPLE JAMS IN PAPER PATH
Description:
There are multiple jams in the paper path. This includes the top cover area.
Remedy:
1. Press ? for detailed information about clearing the jam. 2. Press up and down to step through the instructions.
Code: 20
Display:
20 Insufficient Memory
Description:
The printer has received more data from the computer than fits in available memory.
Remedy:
1. Press to continue printing. NOTE A loss of data will occur. 2. Reduce the complexity of the print job to avoid this error in the future. 3. Adding memory to the printer may allow printing of more complex pages.
Code: 22
Display:
22 EIO X BUFFER OVERFLOW
Description:
The EIO card in card slot X has overflowed its I/O buffer during a busy state.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resend the print job. 4. If the error still occurs, replace the EIO card in slot X.
Code: 22
Display:
22 EMBEDDED I/O BUFFER OVERFLOW
Description:
The embedded Jetdirect print server has overflowed.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resend the print job. 4. If the error still occurs, replace the EIO card in slot X.
Code: 22
Display:
22 PARALLEL I/O BUFFER OVERFLOW
Description:
The parallel buffer has overflowed during a busy state
Remedy:
1. Press to resume printing. NOTE A loss of data will occur. 2. If the message persists, disconnect the parallel cable at both ends and reconnect. 3. Ensure that a high quality cable is being used. Some non-hp parallel cables might be missing pin connections or might not otherwise conform to IEEE-1284 specifications. 4. Replace the cable. 5. Leave the computer connected and try to connect to a different printer. If this still fails, replace the formatter.
Code: 22
Display:
22 USB I/O BUFFER OVERFLOW
Description:
The USB buffer has overflowed during a busy state.
Remedy:
1. Press to continue printing. NOTE A loss of data will occur. 2. If the message persists, disconnect the USB cable at both ends and reconnect. 3. Ensure that a high quality cable is being used. Some non-hp parallel cables might be missing pin connections. 4. Replace the cable. 5. Leave the computer connected and try to connect to a different printer. If this still fails, replace the formatter.
Code: 40
Display:
40 EIO X BAD TRANSMISSION
Description:
A connection with the card in EIO slot X has been broken.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resend the print job. 4. If the error still occurs, replace the EIO card in slot X.
Code: 40
Display:
40 EMBEDDED I/O BAD TRANSMISSION
Description:
A connection with the embedded Jetdirect print server has been broken.
Remedy:
1. Press GO to continue printing. 2. Power cycle the printer. 3. Resent the print job. 4. If the error still occurs, replace the EIO card in slot X or the formatter.
Code: 41.3
Display:
41.3 UNEXPECTED SIZE IN TRAY X
Description:
Media is loaded that is longer or shorter in the feed direction than the size configured for the tray.
Remedy:
1. Make sure the correct settings are set for the trays. 2. Run a paper path diagnostic test to determine if all sensors are working correctly. 3. Replace the paper feed assembly.
Code: 41.5
Display:
41.5 UNEXPECTED TYPE IN TRAY X
Description:
The printer senses a different media type in the media path than configured in the tray.
Remedy:
1. Make sure the correct settings are set for the trays. 2. Run a paper path diagnostic test to determine if all sensors are working correctly. 3. Replace the paper feed assembly.
熱門圖文