東芝2000AC打印機出現CA00怎么解決
更新時間：2025/7/11 3:58:25,view:611東芝2000AC蘇州東芝打印機售后服務中心客服熱線69616769，蘇州東芝售后電話，東芝售后網點， 東芝2000ac 01ff, 東芝2000ac顯示沒墨了, 東芝2000ac c380, 東芝2000ac提示定期維護時間01ff,維修視頻
蘇州東芝打印機維修站電話696l6769，維修，服務
CA00] Color registration abnormality
Image formation Issue, Could be any Color , Drum , Developer or more.
When you check the printing status to find out that the color printing ratio is less than 5%, color toner
low density might be the cause.
Turn the code 08-2692 “Prevention of color toner low density / ON/OFF setting” to ON, and then set
number of sheets to be judged at the code 08-2693 “Prevention of color toner low density / Judged
number of sheets setting”.
If the color printing ratio is 5% or more, check the following.
1.Check if there is any abnormality on the hand grips and rods of the main charger cleaner. Correct if
there is.
2.Check if the drum is rotated properly by turning the coupling of the developer unit. Correct the auger
and the surrounding hardware if not.
3.Check if the connectors CN337, CN346 and CN358 of the LGC board are disconnected from the
laser optical unit or the harnesses are open circuited.
4.Check if there is any stain or scratch on the glass surface of the laser optical unit. Clean or correct if
there is.
5.Check if there is any stain on the image quality sensor and Image position aligning sensors.
6.Check if the sensor shutter is working properly.
* If the error still occurs, check the following.
< Invalidating color registration control >
(1)Turn the power ON while [0] and [8] are pressed simultaneously.
(2)Key in “4546”, then press the [START] button. (08-4546: Position adjustment control / Mode setting)
(3)Set the value to “0” (not performed automatically).
(4)Turn the power OFF.
東芝2000AC打印機出現CA00怎么解決,維修手冊,技術資料
東芝2000AC進紙卡紙 手機用戶116.54.*.* 2020-7-7 怎么解決
東芝2000AC不開機 呂郟霽 2020-7-8 原因分析
復印機在預熱后校準圖像時，顯影輥表面覆蓋的載體不足或沒有載體，在傳輸過程中，吸附碳粉量過少，從而影響顯影效果，復印機檢測到異常，顯示報錯CA00，也就是圖像套色校正異常。
解決方案
檢查顯影輥上的載體量。
東芝2000ac打印淺 手機用戶42.234.*.* 2020-7-24 想買FC一2000AC電路主板
東芝2000acusb無法識別 手機用戶42.234.*.* 2020-7-24 想買FC一2000AC電路主板
東芝2000ac進紙卡紙 蔣聘門 2020-7-27 淘寶看看，或只能維修站購買
東芝2000AC錯誤提示 手機用戶113.12.*.* 2020-10-24 東芝打印機打印的時候出現紫色一條道怎么回事
東芝2000AC錯誤提示 手機用戶113.12.*.* 2020-10-24 東芝打印機打印的時候出現紫色一條道怎么回事
東芝2000AC打印臟 尤豫 2020-10-24 紅色鼓出問題了。更換 可以打印單色調判斷哪個鼓出問題了
技術 曲陌靈風 發表于 2022/3/24 ca00換黑色載體就行了
CA00] Color registration abnormality
Image formation Issue, Could be any Color , Drum , Developer or more.
When you check the printing status to find out that the color printing ratio is less than 5%, color toner
low density might be the cause.
Turn the code 08-2692 “Prevention of color toner low density / ON/OFF setting” to ON, and then set
number of sheets to be judged at the code 08-2693 “Prevention of color toner low density / Judged
number of sheets setting”.
If the color printing ratio is 5% or more, check the following.
1.Check if there is any abnormality on the hand grips and rods of the main charger cleaner. Correct if
there is.
2.Check if the drum is rotated properly by turning the coupling of the developer unit. Correct the auger
and the surrounding hardware if not.
3.Check if the connectors CN337, CN346 and CN358 of the LGC board are disconnected from the
laser optical unit or the harnesses are open circuited.
4.Check if there is any stain or scratch on the glass surface of the laser optical unit. Clean or correct if
there is.
5.Check if there is any stain on the image quality sensor and Image position aligning sensors.
6.Check if the sensor shutter is working properly.
* If the error still occurs, check the following.
< Invalidating color registration control >
(1)Turn the power ON while [0] and [8] are pressed simultaneously.
(2)Key in “4546”, then press the [START] button. (08-4546: Position adjustment control / Mode setting)
(3)Set the value to “0” (not performed automatically).
(4)Turn the power OFF.
東芝2000AC打印機出現CA00怎么解決,維修手冊,技術資料
復印機在預熱后校準圖像時，顯影輥表面覆蓋的載體不足或沒有載體，在傳輸過程中，吸附碳粉量過少，從而影響顯影效果，復印機檢測到異常，顯示報錯CA00，也就是圖像套色校正異常。
解決方案
檢查顯影輥上的載體量。
蘇州東芝2000打印機維修服務中心電話0512-696l6769
熱門圖文