hp Color LaserJet CP2020常見故障代碼描述,英文手冊
更新時間：2025/7/6 5:08:15,view:107蘇州hp2020打印機售后服務中心客服熱線69616769，蘇州hp打印機售后維修電話，hp打印機售后網點，hp2020hc電源燈一直閃,打印機電源燈一直閃,打印機報錯cleaning,打印機需要用戶干預,三星m打印機標簽為,laserjet電源一直閃、,shngc10驅動端口多少,紙進一半后燈閃,10驅動下載,HC報警電源燈一直閃,打印機color連不上,cp更換搓紙輪,,墨盒清零,打印機燈一直閃提示錯誤,hc搓紙輪,2020維修視頻2025/7/6
Code: -
Display:
in wrong position
Description:
A print cartridge is installed in the incorrect slot.
Remedy:
Ensure that each print cartridge is in the correct slot. From back to front, the print cartridges are installed in this order: yellow, magenta, cyan, black.
Code: -
Display:
Device error
Description:
An internal error occurred.
Remedy:
Press OK to resume the job.
Code: -
Display:
Front Door open
Description:
The product front door is open.
Remedy:
Close the door.
Code: -
Display:
Fuser Error
Description:
The product has experienced an error with the fuser.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. Turn off the product, wait at least 25 minutes, and then turn on the product. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 10.XXXX
Display:
10.XXXX Supply error
Description:
The e-label for one of the print cartridges cannot be read or is missing.
• 10.0000 = black e-label error • 10.0001 = cyan e-label error • 10.0002 = magenta e-label error • 10.0003 = yellow e-label error • 10.1000 = black e-label is missing • 10.1001 = cyan e-label is missing • 10.1002 = magenta e-label is missing • 10.1003 = yellow e-label is missing/¬?
Remedy:
Reinstall the print cartridge. Turn the product off, and then on. If the problem is not solved, replace the cartridge.
Code: 49
Display:
49 Error
Description:
The product experienced an internal error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 51.XX
Display:
51.XX Error
Description:
The product has experienced an internal hardware error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 54.XX
Display:
54.XX Error
Description:
The product has experienced an error with one of the internal sensors.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 55.X
Display:
55.X Error
Description:
The product has experienced an internal error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 59.X
Display:
59.X Error
Description:
The product has experienced a problem with one of the motors.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 79
Display:
79 Error
Description:
The product has experienced an internal firmware error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 79
Display:
79 Service error
Description:
An incompatible DIMM is installed.
Remedy:
1. Turn the product off. 2. Install a DIMM that the product supports. 3. Turn the product on.
Display:
Description:
A print cartridge is installed in the incorrect slot.
Remedy:
Ensure that each print cartridge is in the correct slot. From back to front, the print cartridges are installed in this order: yellow, magenta, cyan, black.
Code: -
Display:
Device error
Description:
An internal error occurred.
Remedy:
Press OK to resume the job.
Code: -
Display:
Front Door open
Description:
The product front door is open.
Remedy:
Close the door.
Code: -
Display:
Fuser Error
Description:
The product has experienced an error with the fuser.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. Turn off the product, wait at least 25 minutes, and then turn on the product. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 10.XXXX
Display:
10.XXXX Supply error
Description:
The e-label for one of the print cartridges cannot be read or is missing.
• 10.0000 = black e-label error • 10.0001 = cyan e-label error • 10.0002 = magenta e-label error • 10.0003 = yellow e-label error • 10.1000 = black e-label is missing • 10.1001 = cyan e-label is missing • 10.1002 = magenta e-label is missing • 10.1003 = yellow e-label is missing/¬?
Remedy:
Reinstall the print cartridge. Turn the product off, and then on. If the problem is not solved, replace the cartridge.
Code: 49
Display:
49 Error
Description:
The product experienced an internal error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 51.XX
Display:
51.XX Error
Description:
The product has experienced an internal hardware error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 54.XX
Display:
54.XX Error
Description:
The product has experienced an error with one of the internal sensors.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 55.X
Display:
55.X Error
Description:
The product has experienced an internal error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 59.X
Display:
59.X Error
Description:
The product has experienced a problem with one of the motors.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 79
Display:
79 Error
Description:
The product has experienced an internal firmware error.
Remedy:
Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
Code: 79
Display:
79 Service error
Description:
An incompatible DIMM is installed.
Remedy:
1. Turn the product off. 2. Install a DIMM that the product supports. 3. Turn the product on.
熱門圖文